The California State University
Office of the Chancellor - SWRL Location
Computer Aided Design (CAD) - Guidelines
Edition Date: June 30, 1995
Revision Date: May 18, 1995
This Page intentionally left blank.
TABLE OF CONTENTS
Overview
1.0 General Requirements Page # 5
2.0 Required Documentation Page # 6
2.1 Diskette Labeling Page # 6
2.2 File Description Page # 8
3.0 Required Data & File Formats
3.1 File Types Page # 9
3.1.1 Text Files Page # 9
3.1.2 Drawing Files Page # 9
3.2 File Information Page # 9
3.3 File Format Page # 10
3.4 File Size And Organization Page # 10
3.5 Copy And Compression Format Page # 10
3.6 Reference Files Page # 10
3.7 Document File Format Page # 10
3.8 File Naming Page # 11
4.0 Drawing Formats & Graphics Page # 13
4.1 Standard Coordinate System Page # 13
4.2 Prototype Drawing Files Page # 13
4.3 Standard Sheet Sizes And Formats Page # 13
4.4 Graphics Page # 13
4.4.1 Text Page # 13
4.4.2 Special Entity Requirements Page # 14
4.5 Dimensions Page # 14
4.6 Fill And Hatch Patterns Page # 15
4.7 Line Weights Page # 15
5.0 Layering Page # 16
5.1 Layer Guidelines By Discipline Page # 17
5.1.1 Architectural Page # 18
5.1.2 Structural Page # 20
5.1.3 Mechanical Page # 22
5.1.4 Plumbing Page # 24
5.1.5 Fire Protection Page # 25
5.1.6 Electrical Page # 26
5.1.7 Civil Page # 27
5.1.8 Boundary Survey And Easements Page # 28
5.1.9 Topographic Plans Page # 29
5.1.10 Landscape Page # 30
5.1.11 Campus Master Plans Page # 31
5.1.12 Utility Infrastructure Page # 32
5.2 Minor Grouping Abbreviations Page # 34
5.3 Modifiers And User Definition Abbreviations
Page # 37
S Submittal Prototypes Page # 41
S.0 Typical Drawing File Set Up Page # 42
S.1 Small Building (Minor Capital) Renovation Project Page # 43
S.2 Campus Utility Map Page # 53
S.3 Major Building Project Page # 61
This Page intentionally left blank.
OVERVIEW
This computer aided design (CAD) guideline
is for use on all of the California State University (CSU) Campusesí.
These standards have been developed to serve as a template for
the development of contractually required electronic data submittals
to the California State University. Any deviations from these
standards are to be approved in writing in advance by the University.
Consultants shall contact Physical Planning & Development's
(PP&Dís) CAD resources for the most current release
and amendments prior to the commencement of any work.
1.0 GENERAL REQUIREMENTS
All information described in section 3.0 is
to be included in the electronic data deliverables. Any additional
files are to be excluded from the deliverable package unless otherwise
directed by the University. All deliverables are to be provided
on DOS 3 1/2î DSHD Diskettes (1.44 MB).
All files are to be transferred to diskettes
using the DOS copy command with DOS version 3.3 or later. Refer
to section 3.5 for copy and compression formats.
All drawings files will be saved in AutoCad
version 12.0. No other formats or versions will be acceptable.
The submittor is responsible for archiving
the electronic data until final written acceptance from the University
has been issued. Electronic data deliverables are required with
all major submittals as past schematic design unless otherwise
directed by Contract Agreements.
2.0 REQUIRED DOCUMENTATION
The electronic data deliverable package will
include 3 1/2î diskettes with labels and 8 1/2îx 11î
hard copy print out of the file descriptions.
2.1 DISKETTE LABELING
All diskettes are to be labeled as follows:
CAMPUS:
Campus for which the project is intended for. Specify satellite
location if applicable.
DATE: The
date the data was delivered to the campus for final acceptance.
PROJECT: Title
of the project.
BLDG NUMBERS:
Two digit building number identified by the campus specific to
the project.
AUTOCAD VERSION:
Auto CAD version.
DOS VERSION:
DOS utility version.
COMPANY:
Name of consultant to the campus.
PHONE NUMBER:
Phone number of consultant.
DISKETTE NUMBER: Diskette
number. Deliverables diskette are to be numbered in coordination
with File Descriptions.
FILES: List
of drawing files included on diskette.
Individual specification sections are not to
be listed on the diskette label. Limit file listing on text files
to either ìSPECIFICATIONSî of ìFILE DESCRIPTIONSî.
See Examples below.
2.1 DISKETTE LABELING Continued
2.2 FILE DESCRIPTION
Each diskette is to be accompanied by a file
description for each file on an 8 1/2îx11î hard copy
print out and a text file in ASCII format. Master files using
reference files are to itemize all applicable reference files
and layers. Each file description is to include the following
information:
CAMPUS
PROJECT
BUILDING NUMBER
DATE
CONSULTING COMPANY
ADDRESS & PHONE NUMBER
PROJECT MANAGER
FILE NAME
LAYERING OR SECTIONS
REFERENCE FIELD w/LAYERS (only for master files)
REMARKS
See example below.
CALIFORNIA STATE UNIVERSITY
ELECTRONIC DATA - FILE DESCRIPTION
Prepared for: Remarks:
CSU, Long Beach Paper space and model space has
Business Science Bldg. -#23 been used on this file format.
1/1/93
Prepared By:
A1 Architects, Inc.
1000 Main Street
Los Angeles, CA 90000
Jon Doe, Project Manager
(310) 555-1000
The following layers and reference
files are included in file A23AF01.DWG
Primary Layers #1 Ref. File #2 Ref. File #3 Ref. File
A230EF02.DWG A230FF03.DWG A230SF04.DWG
A-FLOR E-FLOR F-FIRE S-FLOR
A-FURN E-LITE F-HALN S-PCOL
A-GLAZ E-PCON S-PSFR
A-PARE E-LITE
A-PEQM
_
3.0 REQUIRED DATA
3.1 FILE TYPES
Both text and graphic type files will be included
in the electronic data deliverables. Text files and Graphic files
are not to be mixed on the same diskette.
3.1.1 TEXT FILES
The only types of text files to be included
in the deliverables are File Descriptions and Specifications unless
otherwise directed by the University. Both file types are to be
saved in an ASCII text format using DOS version 3.3 or later.
No other files formats will be acceptable for text files.
3.1.2 DRAWING FILES
The only types of drawing files to be included
in the deliverables are Document Files and Master Files unless
otherwise directed by the University.
A Document File is a single plot ready file.
They are to be completely formatted and plot-ready. One Document
file is required for each drawing sheet included in the construction
or map set.
Master Files are single files that may rely
on other reference files. These would consist of overall master
plan that include a comprehensive format of information. Refer
to section 3.6 for direction on reference files.
3.2 FILE INFORMATION
All information included in hard copy submittals
are to included in electronic data deliverables.
If blocks and cells are used in the documents,
then they are to be consistent throughout without deviation. For
example, if fixture ìAî is used in a block form,
then all locations where fixture ëAî is shown shall
be of the same block.
No raster images will be acceptable. All graphic
images in the drawing files are to be vectorized images.
Drawings relying on reference files are to
include a list of dependent reference files on the title block.
Any reference files or block files pertinent to the content of
the master file is required data and is to be included on the
File Description.
3.3 FILE FORMAT
All submittals shall incorporate good drafting
practices and organize information clearly and systematically.
Graphic elements representing a physical component
of the project (i.e., lines indicating a wall, or a block indicating
a light fixture) shall be shown only one time in the submittals.
If additional references to the object are needed in additional
drawing files they shall be shown via an external reference of
the original file.
Examples of acceptable organization of drawing
information are shown in section S Submittal Prototypes.
3.4 FILE SIZE AND ORGANIZATION
It is the responsibility of the consultant
to organize drawing information coherently and maintain reasonable
file sizes. Where possible file sizes should not exceed 1 to 2
megabytes. In no case shall file sizes exceed 5 megabytes.
3.5 COPY AND COMPRESSION FORMAT
File requiring less than one diskette for transmission
will be written to diskette using the DOS copy command. No other
DOS commands will be acceptable (i.e. BACKUP RESTORE). If more
than one file is copied to a single diskette, the diskette label
will include all file names, refer to section 2.1.
Files larger than 1.44 megabytes are to be compressed using self-extracting files (i.e. PKZIP.EXE). Each file will be compressed independent of other files. No clustered file compressionís will be acceptable. Compressed files shall be given the same file name as the drawing file with an EXE extension
(i.e. A210A211.DWG =A210A211.EXE).
Where file sizes cannot be reasonably kept
to a size that is compressible to one disk, submittal may be compressed
onto multiple disks using file compression software. Any compressed
files that are not self-extracting shall be accompanied by the
necessary decompression utilities.
3.6 Reference Files
Drawings using reference files are to list
referenced files on the title block layer. This list will give
an account of dependent files for the complete document. This
information will also be added to the file description for master
files, refer to section 2.2. In all submittals reference files
shall be located in the same directory as the dependent files
and shall NOT include path names in the reference file attachment.
3.7 Document File Format
One drawing file corresponding to each hard
copy submittal sheet is to be saved in a plot-ready format. Document
files shall to be formatted utilizing paper space. Plotting shall
be set to plot a view named ìplotî with a plot scale
of 1î=1îformatted to match the hard copy submittals.
3.8 FILE NAMING
All files included in the electronic data deliverable
package will conform to the following file naming convention.
Alternative file naming conventions may be utilized only with
prior written approval of a detailed alternative. Approval of
alternate naming conventions is solely at the discretion of the
University.
First, Second and Third Characters
XXXXXXXX.XXX
First, second and third character on all file
name will identify the building number as listed in the CSU Space
and Facilities Database. These numbers shall be obtained from
the University. One and two digit building numbers shall be preceded
by leading 0's to provide three (3) character building numbers.
Fourth Character
XXXXXXXX.XXX
Fourth character on all file names will identify
additions or renovations to an existing building. This will be
an alpha character. For file names representing new buildings,
the number zero will be used, i.e., A210AP21.DWG.
Fifth Character
XXXXXXXX.XXX
Fifth character on all file names will identify
the applicable consultant. They are as follows:
A Architecture
C Civil Engineering
E Electrical Engineering
F Fire Protection
G General Information (non-discipline specific)
L Landscape Architecture
M Mechanical Engineering
P Plumbing Engineering
Q Communications
S Structure Engineering
U Utilities Infrastructure (Campus wide)
3.8 FILE NAMING (Continued)
Sixth, Seventh and Eighth Characters Plus
File Extension
XXXXXXXX.XXX
These six characters will be unique between
the four different types of files included in the deliverable
package, refer to section 3.1.
FILE DESCRIPTION XXXXXXXX.XXX
File descriptions in ASCII format will only
be required for drawing files. The last three characters of the
file name are to match the file being referenced to for both document
files and master files. The extension is to be noted as ìlogî.
Example: A210AP21.DWG = A210AP21.LOG
SPECIFICATIONS XXXXXXXX.XXX
All specifications included in the deliverable
package are to be compiled into one single text file. All specification
file formats will be designated as SPC.TXT
Example: Specification #11680 = A210ASPC.TXT
All document files will use the last three
digits of the drawing name. This number is to match the specific
drawing sheet referenced to.
Example: Sheet # A2.11 = A210A211.DWG
MASTER FILES XXXXXXXX.XXX
All master files will use the last three digits
of the drawing name. The first digit will identify the type of
sheet as follows:
XXXXXXXX.XXX
B = Building Sections
C = Reflected Ceiling Plan
D = Detail
E = Exterior Elevations
F = Floor Plan
I = Interior Elevations
R = Roof Plan
S = Schedules
S = Site Plan
U = Utilities Infrastructure (Campus wide)
W = Wall Sections
X = Demolition Plan
The second and third character will identify
the floor number or drawing number.
XXXXXXXX.XXX
Example: 12th Floor Reflected Ceiling Plan
= A210RC12.DWG
4.0 DRAWING FORMATS & GRAPHICS
Sheet border, title block, consultantís
stamp, logos and all other components of the master drawing sheet
shall be located in paper space.
All graphic representations of the project
or facility and all related notes, dimensions, symbols, etc.,
shall be constructed in model space.
All graphic entities shall be comprised of
representational and geometrically accurate entities, e.g. a circle
shall be represented by circle entity and NOT a visually equivalent
collection of line segments. Items shown in a dashed linetype
shall be created with the LINETYPE feature and NOT by individual
line elements.
4.1 STANDARD COORDINATE SYSTEM
The world coordinate system shall correspond
to the California Coordinate System NAD 83 for all map and plan
view files. Where necessary for composting drawings on a sheet
a user coordinate system named ìPLAN VIEWî shall
be established.
4.2 PROTOTYPE DRAWING FILES
Prototype drawing files and symbols shall be
utilized when provided by the University. These may include but
not be limited to; typical title sheets, formatted drawing files,
drawing symbology and other blocks. When blocks contain attributes
all relevant attribute fields are to be filled out.
4.3 STANDARD SHEET SIZES AND FORMATS
All sheet sizes are to be limited to five
standard formats. Required sheet
size is specific to each project and is under the discretion of
the University. They are as follows:
A Sized Plot 8 1/2/î x 11î
B Sized Plot 11î x 17î
C Sized Plot 24î x 36î (preferred format)
D Sized Plot 30î x 42î
4.4 GRAPHICS
4.4.1 TEXT
All text is to be created only with the following
standard AutoCAD's SHX files:
romans Suggested for most text and attribute entries
romand May be used for larger text sizes
romant Limit use to control regeneration times
italict "
italicc "
All text sizes are to plot and display in accordance
with the following minimum sizes:
Schedules 1/8î
Dimensions and Notes 1/8î
Grid Numbers 3/16î
Sheet Detail Title 3/16î
Sheet Title 1/4î
Sheet Number 3/8î
4.4.2 SPECIAL ENTITY REQUIREMENTS
All wall lines will have their thickness (vertical
dimension) set to match the wall height.
All walls shall have a center line ("A-WALL"
not plotted) with itsí thickness set to match the wall
height. Can serve as hook to Database Info.
Common symbols, doors, W.C.s, windows, equipment,
etc., shall be blocks. Consultants shall use predefined blocks
when provided by the university.
Entities to be shown as blocks
ïAll Plumbing & Bath Fixtures
e.g., water closets, urinals, lavatories, tubs, grab bars, accessories,
mirrors
ïAll Electrical Devices & Hardware
e.g., lighting fixtures, switches, outlets, panels
ïMechanical Equipment e.g., supply
diffusers, return grilles, thermostats, air handlers,
ïDoors (insert with scale set to
door size)
ïWindows (insert with scale to
window size)
ïEquipment, type II * II
ïFurniture
ïDrawing Symbols
ïDoor and window marks, room #
indicators, scale indicators, north arrows
4.5 DIMENSIONING
All dimensions shown in the project submittals
shall be fully associative. Dimension definition points should
be located with an appropriate Object Snap (End Point,
Mid Point, etc.) or otherwise located precisely on the
project geometry. Manual imput of dimension text or otherwise
over riding the actual dimensions is NOT acceptable in submittals
to the university.
4.5 FILL AND HATCH PATTERNS
No rasterized images will be acceptable for
either text or drawing files. Vectorized fill patterns are acceptable.
Limit excessive use of hatch patterns to avoid unnecessarily large
files. All consultants are responsible for keeping files sizes
within manageable limits. Refer to section 4.2 for copy and compression
formats.
4.6 Line Weights And Pen Assignments
Preliminary Recommendations:
These pen assignments are provided to support CSU
personnel in producing consistent hard copy output from the electronic
submittals. Consultants
are solely responsible for the production and appearance of their
hard copy submittals.
Note: While color #s 14, 54, 94, 134, 174, &
214 have no AutoCAD color name they are a greyed out red, yellow,
green, cyan, blue, & magenta respectively on a standard 256
color AutoCAD display
*All Submittals to the
CSU shall have colors set by layer, colors shall not be set by
entity.
5.0 LAYERING
All layering names and information within shall
coincide with the following guidelines. Only applicable layers
are to be used. Blank layers are not to be included in the electronic
data deliverables. If reference files are used, refer to section
3.6 for additional direction.
Graphic representations of related items shall
be located on a single layer even when indicated on different
drawings. E.g., Full height walls could be properly shown as
A-WALL or A-WALL-FULL but not both.
Graphic indicators for text and notes, e.g.,
header line and arrowheads for a note, shall be located on the
same layer as the corresponding text.
Layer names will be limited to 13 characters
subdivided into 4 sections including: Major, Minor, Modifier and
User Definer as shown below. Layer names of 5 and 9 characters
mat be used when appropriate and consistent with layer naming
guidelines.
PROPOSED 13-CHARACTER LAYER NAME = X-XXXX - XXXX - XXXX
Major group _________
Minor group_____________
Modifier (optional)________________
User Definer (optional)_______________
Major group headings shall define the layerís
discipline as follows:
A = Architectural
C = Civil
E = Electrical
F = Fire Protection
L = Landscape
M = Mechanical
P = Plumbing
Q = Communications
S = Structural
Minor group headings shall define assemblies
or construction systems such as walls, doors, ceilings or electrical
power. Refer to section 5.1.
Modifier headings shall further define the
minor group headings such as full height wall, partial height
wall, emergency lighting or general lighting. Refer to section
5.2.
User Defined heading shall further define the
modifier group heading such as full height wall existing and full
height wall demolished. Refer to section 5.2.
Modifiers and user definer characters are options
provided for extended clarification. Most layers on small projects
will only require five (5) character major/minor format.
5.1 LAYER GUIDELINES BY DISCIPLINE
The CSU CAD Layer guidelines are of necessity both
specific and open ended. The modular nature of guidelines allows
for tremendous flexibility in delineating the myriad components
of CSUís infrastructure.
The following discipline specific guidelines delineate
the acceptable format of layer names for common project types.
It should be noted that the naming structure is consistent across
all disciplines and common elements would be named identically
in all disciplines. The organization of layer names by discipline
is merely a convenience to aid in finding the appropriate layer.
The layer names comprise a single comprehensive system.
For example: A-DOOR is
the only acceptable layer for indicating a door in all disciplines
Electrical Plans, Plumbing Plans etc. By the same logic E-LITE-EXIT
is the only acceptable layer for indicating an exit light in an
architectural drawing.
These disciplines specific guidelines shall be used
whenever possible. Alternative layer names or organization are
not acceptable.
Where the nature of project or drawing requires it,
consultants may propose expansions of the layering guidelines.
The proposed expansion shall be submitted in writing to the Office
of the Chancellor and are subject to revision or rejection at
the discretion of the university. Acceptable expansions shall
utilize the Major Group Headings (see 5.0), Minor Group Abbreviations
(see 5.3), and modifiers and User Definitions (see 5.2) as provided,
as well as the format shown below (see 5.1.x).
Accepted Expansions of the layer name guidelines
may be included in future revisions of the CSU Competitor Aided
Design Guidelines at the discretion of the university.
The color and linetype assignments for the layers are provided to support CSU personnel in producing consistent hard copy output from the electronic submittals. Consultants are solely responsible for the production and appearance of their hard copy submittals.
5.1.1 ARCHITECTURAL LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
A-PARE-**** Occupancy Plan & Area Designations Information
A-PCLG-**** Demolition Plan Information
A-PDEM-**** Ceiling Plan Information
A-PEQP-**** Equipment Plan Information
A-PFLR-**** Floor Plan Information
A-PLGS-**** Large Scale Floor Plan Information
A-PROF-**** Roof Plan Information
A-DETL-**** Detail Drawings Information
A-ELEV-**** Elevation Drawings
A-SECT-**** Section Drawings
A-****-DIMS Dimensions 2, Yellow Continuous
A-****-IDEN Repetitive Annotation, i.e. Rm No's/Equip No's 3, Green Continuous
A-****-KEYN ConDoc Key Notes 3, Green Continuous
A-****-NOTE Notes and Call-outs 3, Green Continuous
A-****-PATT Patterns, Cross Hatching, & Poche 1, Red Continuous
A-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
A-****-SCHD Schedules and Tables of Text 3, Green Continuous
A-****-TEXT General Notes and Specifications 3, Green
Continuous
Building Information Layers
A-WALL Walls 5, Blue Continuous
A-WALL-CNTR Wall Center Lines 2, Yellow Center
A-WALL-FULL Full Height Walls 6, Magenta Continuous
A-WALL-PRHT Partial Height Walls 4, Cyan Continuous
A-WALL-WHED Window Headers 3, Green Continuous
A-WALL-DHED Door Headers 3, Green Continuous
A-WALL-JAMB Door & Window Jambs 6, Magenta Continuous
A-WALL-PATT Wall Insulation, Hatch Patterns &
Fill 1, Red Continuous
A-CLNG-OVHD Ceiling Elements, soffits, and Bulkheads 4, Cyan Hidden
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 1, Red Continuous
A-DOOR Doors 4, Cyan Continuous
A-DOOR-IDEN Door Number, Hardware Group, etc. 3,
Green Continuous
A-GLAZ Window, Window Walls, Curtain Walls,
Glazed Partitions 3, Green Continuous
A-GLAZ-SILL Window Sills 3, Green Continuous
A-GLAZ-IDEN Window Number 3, Green Continuous
5.1.1 Continued
____
Layer Description Color Linetype
____
A-FLOR Floor Information 3, Green Continuous
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 5, Blue Continuous
A-FLOR-STRS Stairs, Escalators, and Ladders 4, Cyan Continuous
A-FLOR-HRAL Stair and Balcony Handrails and Guardrails 4, Cyan Continuous
A-FLOR-TPTN Toilet Portions 4, Cyan Continuous
A-FLOR-SPCL Architectural Specialties 4, Cyan Continuous
A-EQPM Equipment 4, Cyan Continuous
A-EQPM-FIXD Fixed Equipment (CSU Type 1) 4, Cyan Continuous
A-EQDM-MOVE Moveable Equipment (CSU Type 2) 3, Green Dashed
A-EQPM-IDEN Equipment Identification Numbers 3, Green
Continuous
A-FURN Furniture 3, Green Continuous
A-FURN-IDEN Furniture Identification Numbers 3, Green
Continuous
A-ROOF Roof Information 4, Cyan Continuous
A-ROOF-LEVL Level Changes 4, Cyan Continuous
A-ROOF-OTLN Roof Perimeter/Edge, Roof Geometry 6, Magenta Continuous
A-ROOF-STRS Stair Treads and Ladders 4, Cyan Continuous
5.1.2 STRUCTURAL LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
S-PCOL-**** Column Plan Information
S-PFND-**** Foundation Plan Information
S-PSFR-**** Structural Framing Plan Information
S-DETL-**** Detail Drawings Information
S-ELEV-**** Elevation Drawings Information
S-SECT-**** Section Drawings Information
S-****-DIMS Dimensions 2,yellow Continuous
S-****-KEYN ConDoc Key Notes 3, Green Continuous
S-****-NOTE Notes, Call-outs, & Key Notes 3, Green Continuous
S-****-SYMB Symbols, Bubbles, & Targets 4, Cyan Continuous
S-****-SCHD Schedules and Tables of Text 3, Green Continuous
S-****-TEXT General Notes & Specifications 3,
Green Continuous
Building Information Layers
S-ABLT Anchor Bolts & Hold-Downs 4, Cyan Continuous
S-COLS Structural Columns 6, Magenta Continuous
S-COLS-RBAR Reinforcing Bars 5, Blue Continuous
S-COLS-WELD-SYMB Welding Symbols 3, Green Continuous
S-FNDN-FTNG Footings 6, Magenta Continuous
S-FNDN-GRBM Grade Beams 6, Magenta Continuous
S-FNDN-PIER Piers 6, Magenta Continuous
S-FNDN-RBAR Reinforcing Bars 5, Blue Continuous
S-FNDN-WELD-SYMB Welding Symbols 3, Green Continuous
S-FRAM Framing 4, Cyan Continuous
S-FRAM-BEAM Beams 5, Blue Continuous
The drawing may be further segregated with sublayers if needed, e.g.:
S-FRAM-BEAM-PRIM Primary Beams 6, Magenta Continuous
S-FRAM-BEAM-SCND Secondary Beams 4, Cyan Continuous
S-FRAM-DECK Structural Decking 4, Cyan Continuous
S-FRAM-JOIS Joists 6, Magenta Continuous
S-FRAM-RBAR Reinforcing Bars 5, Blue Continuous
S-FRAM-WELD-SYMB Welding Symbols 3, Green Continuous
5.1.2 Continued
____
Layer Description Color Linetype
____
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S-JNTS-CNST Construction Joints 4, Cyan Continuous
S-JNTS-CTRL Control Joints 4, Cyan Continuous
S-SLAB Concrete Slabs 4, Cyan Continuous
S-SLAB-OTLN Slab Outline 6, Magenta Continuous
S-SLAB-RBAR Concrete Slab Reinforcing 5, Blue Continuous
S-WALL Structural Bearing & Sheer Walls 4, Cyan
Continuous
5.1.3 MECHANICAL LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
M-PCON-**** Mechanical Controls Plan Information
M-PHVA-**** HVAC Plan Information
M-PLGS-**** Large Scale HVAC Plan Information
M-PPIP-**** Piping Plan Information
M-PROF-**** Mechanical Roof Plan Information
M-PSTM-**** Steam Piping Plan Information
M-PWCH-**** Chilled Water Piping Plan Information
M-PWHT-**** Hot Water Piping Plan Information
M-DETL-**** Detail Drawings Information
M-ELEV-**** Elevation Drawings Information
M-SECT-**** Section Drawings Information
M-****-DIMS Dimensions 2,yellow Continuous
M-****-KEYN ConDoc Key Notes 3, Green Continuous
M-****-NOTE Notes, Call-outs, & Key Notes 3, Green Continuous
M-****-SYMB Symbols, Bubbles, & Targets 4, Cyan Continuous
M-****-SCHD Schedules and Tables of Text 3, Green Continuous
M-****-TEXT General Notes & Specifications 3,
Green Continuous
Building Information Layers
M-DUCT-SUPP HVAC System Supply Ductwork 4,Cyan Continuous
M-DUCT-RETN HVAC System Return Ductwork 4,Cyan Continuous
M-DUCT-EXHT HVAC System Exhaust Ductwork 4,Cyan Continuous
M-DUCT-OTHR HVAC System Other Ductwork 4,Cyan Continuous
M-HVAC-EQPM HVAC Equipment 5, Blue Continuous
M-CDFF-SUPP Ceiling Supply Diffusers 5, Blue Continuous
M-CDFF-RETN Ceiling Return Diffusers 5, Blue Continuous
M-ODFF Other Diffusers 5, Blue Continuous
M-CONT Controls & Instrumentation 4, Cyan Continuous
M-CONT-THER Thermostats 4, Cyan Continuous
M-CONT-WIRE Low Voltage Wiring 4, Cyan Continuous
M-ENER-SYST Energy Management Systems 4,Cyan Continuous
M-EXHS-DUCT Exhaust System Ductwork 4,Cyan Continuous
M-EXHS-EQPM Exhaust System Equipment 5, Blue Continuous
5.1.3 CONTINUED
____
Layer Description Color Linetype
____
Chilled Water System
M-CWTR-EQPM Chilled Water Equipment 5, Blue Continuous
M-CWRT-FIXT C.W. Above Ground Elements, e.g. Manholes 5, Blue Continuous
M-CWRT-NOTE Chilled Water Notes 3, Green Continuous
M-CWTR-PIPE Chilled Water Pipe 4,Cyan Continuous
When Layers below are used to segregate supply
& return subgroup PIPE may NOT be used.
M-CWTR-RTRN Chilled Water Return Lines 4, Cyan Continuous
M-CWTR-SUPL Chilled Water Supply Lines 4, Cyan Continuous
M-DUAL-PIPE Dual Temperature System Pipe 4,Cyan Continuous
M-DUAL-EQPM Dual Temperature System Equipment 5,
Blue Continuous
Hot Water (Space Heating) System
M-HOTW-EQPM Hot Water Equipment 5, Blue Continuous
M-HOTW-FIXT H.W. Above Ground Elements, e.g. Manholes 5, Blue Continuous
M-HOTW-PIPE Hot Water Pipe 4,Cyan Continuous
When Layers below are used to segregate supply
& return subgroup PIPE may NOT be used.
M-HOTW-RTRN Hot Water Return Lines 4, Cyan Continuous
M-HOTW-SUPL Hot Water Supply Lines 4, Cyan Continuous
M-REFG-EQPM Refrigeration System Equipment 5, Blue Continuous
M-REFG-PIPE Refrigeration System Piping 4,Cyan Continuous
M-STEM-LPIP Low Pressure Steam Piping 4,Cyan Continuous
M-STEM-MPIP Medium Pressure Steam Piping 4,Cyan Continuous
M-STEM-HPIP High Pressure Steam Piping 4,Cyan Continuous
M-STEM-EQPM Refrigeration System Equipment 5, Blue
Continuous
M-SPCL-**** Special Systems
M-VENT-DUCT Industrial or Laboratory Venting 4,Cyan Continuous
M-VENT-EQPM Industrial or Laboratory Venting Equipment
4,Cyan Continuous
5.1.4 PLUMBING LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
P-PPLM -**** Plumbing Plan Information
P-DETL-**** Detail Drawings Information
P-ELEV-**** Elevation Drawings Information
P-SECT-**** Section Drawings Information
P-RISR -**** Plumbing Riser Diagram Information
P-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
P-****-TEXT General Notes and Specifications 3, Green Continuous
P-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
P-****-DIMS Dimensions 2, Yellow Continuous
P-****-SCHD Schedules and Tables of Text 3, Green
Continuous
Building Information Layers
Acid, Alkaline, and Oil Waste System
P-ACID-PIPE Acid, Alkaline, and Oil Waste System Piping 4, Cyan Continuous
P-ACID-EQPM Acid, Alkaline, and Oil Waste System
Equipment 5, Blue Continuous
Domestic Hot & Cold Water System
P-DOMW-PIPE Domestic Hot and Cold Water Piping 4, Cyan Continuous
P-DOMW-EQPM Domestic Hot and Cold Water Equipment
5, Blue Continuous
Sanitary Drainage
P-SANR-PIPE Sanitary Piping 4, Cyan Continuous
P-SANR-VENT Sanitary Vent Piping 4, Cyan Continuous
P-SANR-EQPM Sanitary Equipment 5, Blue Continuous
P-SANR-FTXT Sanitary Fixture 5, Blue Continuous
Storm Drainage System
P-STRM-PIPE Storm Drain Piping 4, Cyan Continuous
P-STRM-RFDR Roof Drains 5, Blue Continuous
Natural Gas System
P-NGAS-PIPE Natural Gas System Piping 4, Cyan Continuous
P-NGAS-EQPM Natural Gas System Equipment 5, Blue
Continuous
Laboratory Gas System
P-LABS-PIPE Laboratory Gas Piping 4, Cyan Continuous
P-LABS-EQPM Laboratory Equipment 5, Blue Continuous
5.1.5 FIRE PROTECTION SYSTEMS LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
F-PSPR-**** Sprinkler Plan
F-PFPE-**** Fire Protection Equipment Plan
F-RISR-**** Sprinkler Riser Program
F-DETL-**** Detail Drawings Information
F-SECT-**** Section Drawings Information
F-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
F-****-TEXT General Notes and Specifications 3, Green Continuous
F-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
F-****-DIMS Dimensions 2, Yellow Continuous
F-****-SCHD Schedules and Tables of Text 3, Green
Continuous
Building Information Layers
F-CO2S-PIPE CO2 (Carbon Dioxide) System Piping 4, Cyan Continuous
F-CO2S-EQPM CO2 (Carbon Dioxide) System Equipment 5, Blue Continuous
F-HALN-PIPE Halon System Piping 4, Cyan Continuous
F-HALN-EQPM Halon Equipment 5, Blue Continuous
F-HALN-SPHD Halon Spray Heads 5, Blue Continuous
F-SPRN-SPHD Fire Protection Sprinkler Heads 5, Blue Continuous
F-SPRN-PIPE Fire Protection Sprinkler Piping 4, Cyan
Continuous
F-STAN-EQIP Fire Protection Standpipe Equipment 5, Blue Continuous
F-STAN-PIPE Fire Protection Standpipe Piping 4, Cyan
Continuous
F-PROT-EQPM Fire System Equipment
(Fire Hose Cabinet, Extinguishers) 5, Blue Continuous
F-PROT-ALRM Fire Alarm 5, Blue Continuous
F-PROT-SMOK Smoke Detectors or Heat Sensors 5, Blue
Continuous
5.1.6 ELECTRICAL LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
E-PAUX-**** Auxiliary Systems Plan Information
E-PCOM-**** Communications Plan Information
E-PLIT-**** Lighting Plan Information
E-PPOW-**** Power Plan Information
E-RISR-**** Electrical Riser Diagrams
E-DETL-**** Detail Drawings Information
E-SECT-**** Section Drawings Information
E-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
E-****-TEXT General Notes and Specifications 3, Green Continuous
E-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
E-****-DIMS Dimensions 2, Yellow Continuous
E-****-SCHD Schedules and Tables of Text 3, Green
Continuous
Building Information Layers
Lighting
E-LITE-CLNG Ceiling Mounted Lighting 5, Blue Continuous
E-LITE-EXIT Exit Lighting 5, Blue Continuous
E-LITE-EMER Emergency Lighting 5, Blue Continuous
E-LITE-FLOR Floor Lighting 5, Blue Continuous
E-LITE-ROOF Roof Mounted Lighting 5, Blue Continuous
E-LITE-SITE Site Lighting Fixtures 5, Blue Continuous
E-LITE-SWCH Lighting Switches 5, Blue Continuous
E-LITE-WIRE Wiring and Conduit 5, Blue Dashed
E-LITE-NUMB Lighting Circuit Numbers 4, Cyan Continuous
E-LITE-IDEN Luminaire Identification and Text 4,
Cyan Continuous
Power
E-POWR-WALL Wall Outlets & Receptacles 5, Blue Continuous
E-POWR-CLNG Ceiling Receptacles and Devices 5, Blue Continuous
E-POWR-FLOR Floor Mounted Outlets 5, Blue Continuous
E-POWR-EQPM Power Equipment 5, Blue Continuous
E-POWR-CABL Cable Trays 4, Cyan Continuous
E-POWR-NUMB Power Circuit Numbers 4, Cyan Continuous
E-POWR-WIRE Power Wiring and Conduit 4, Cyan Dashed
Electrical Control Systems
E-CTRL-EQPM Control System Equipment & Devices 5, Blue Continuous
E-CTRL-WIRE Control System Wiring 4, Cyan Dashed
E-GRND Electrical Ground System 3, Green Continuous
E-PROT-WIRE Fire Protection System Wiring 3, Green
Dashed
E-WKLP-INFO Clearances and work space req. (NEC Codes
etc.) 2, Yellow Dashed
5.1.7 CIVIL LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
C-PGRD-**** Grading Plan Information
C-PPAV-**** Paving Plan Information
C-DETL-**** Detail Drawings Information
C-SECT-**** Section Drawings Information
C-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
C-****-TEXT General Notes and Specifications 3, Green Continuous
C-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
C-****-DIMS Dimensions 2, Yellow Continuous
C-****-SCHD Schedules and Tables of Text 4, Cyan
Continuous
Project Information Layers
Property Lines & Survey Benchmarks
See Section 5.1.8 for Topographic Contour Layers
Contour Lines & Elevations
See Section 5.1.9 for Topographic Contour Layers
C-BLDG-EXST Footprint of Existing Building 3, Green Continuous
C-BLDG-DEMO Footprint of Existing Bldg. to be Demolished
3, Green Continuous
C-PKNG Parking Lots 3, Green Continuous
C-PKNG-STRP Parking Lot Striping, and Pavement 3, Green Continuous
C-PKNG-CARS Graphic Illustration of Cars 1, Red Continuous
C-PKNG-CURB Curbs and Wheel Stops 3, Green Continuous
C-ROAD Roads 3, Green Continuous
C-ROAD-CNTR Road Center Lines 3, Green Continuous
C-ROAD-CURB Curbs 3, Green Continuous
C-ROAD-BRDG Roadway Bridges 4, Cyan Continuous
C-ROAD-PROP Proposed Road 4, Cyan Continuous
C-ROAD-DEMO Existing Road to be Demolished 3, Green
Continuous
C-STRM-CULV Culverts, Headwalls, Drainage Inlets 6, Magenta Continuous
C-STRM-IDEN Storm Sewer System Annotation 4, Cyan Continuous
C-STRM-DTCH Drainage Ditches 3, Green Dashed
P-STRM-FIXT Storm Drainage Surface Features 5, Blue Continuous
(Catch Basins, Manholes)
P-STRM-PIPE Storm Drain Pipes 5, Blue Dashed
Site utilities use the same layering protocols as
building utilities, e.g. Site Lighting would be:
E-LITE-SITE Site Lighting Fixtures 5, Blue Continuous
E-LITE-WIRE Wiring and Conduit 5, Blue Dashed
E-LITE-NUMB Lighting Circuit Numbers 4, Cyan Continuous
See the appropriate discipline specific guidelines
e.g. 5.1.6 for site utilities layering.
5.3.8 BOUNDARY SURVEY LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
C-PBND-**** Boundary Plan Information
C-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
C-****-TEXT General Notes and Specifications 3, Green Continuous
C-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
C-****-DIMS Dimensions 2, Yellow Continuous
Project Information Layers
C-GRID Grid Lines (California Coordinates) 1, Red Continuous
C-GRID-NOTE Grid Coordinates and Notes 3, Green Continuous
C-PROP Property Line (Campus Boundary) 4, Cyan Phantom
C-PROP-NOTE Property Line Notes 5, Blue Continuous
C-PROP-ESMT Easements 6, Magenta Continuous
C-PROP-DIMS Boundary and Distance Notations 2, Yellow
Continuous
C-PROP-ESMT Easements, Right of Ways, Setback Lines 6, Magenta Continuous
C-PROP-BRNG Bearings and Distance Labels 4, Cyan
Continuous
C-ROAD Roads and Streets 5, Blue Continuous
C-ROAD-IDEN Road and Street Names 4, Cyan Continuous
5.3.9 TOPOGRAPHIC PLANS LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
C-PTOP-**** Topographic Plan Information
C-DETL-**** Detail Drawings Information
C-SECT-**** Section Drawings Information
C-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
C-****-TEXT General Notes and Specifications 3, Green Continuous
C-****-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
C-****-DIMS Dimensions 6, Magenta Continuous
C-****-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Building Information Layers
C-GRID Grid Lines (California Coordinates) 3, Green Continuous
C-GRID-NOTE Grid Coordinates and Notes 3, Green Continuous
C-BLDG Building Outline 2, Yellow Continuous
C-BLDG-ELEV Building Elevations 2, Yellow Continuous
Topographic Information
C-TOPO-SPOT Spot Elevations (Tick Marks & Text) 3, Green Continuous
C-TOPO-MAJR Major Contour Lines 6, Magenta Dash Dot
C-TOPO-MAJR-TEXT Major Contour Lines Text (Elevation) 3, Green Continuous
C-TOPO-MINR Minor Contour Lines 4, Cyan Dash Dot
C-TOPO-MINR-TEXT Minor Contour Lines Text (Elevation) 3, Green Continuous
C-TOPO-DEMO Existing Contour Lines to be Changed 2, Yellow 2 Dashed
C-TOPO-MACL Major Depressed Contour Lines (Wet lands) 4, Cyan Continuous
C-TOPO-MICL Minor Depressed Contour Lines (Wet lands)
6, Magenta Continuous
C-PROP Property Line (Campus Boundary) 4, Cyan Phantom
C-PROP-NOTE Property Line Notes 5, Blue Continuous
C-PROP-ESMT Easements 6, Magenta Continuous
C-ROAD Roads and Streets 6, Magenta Continuous
C-ROAD-CURB Curb Lines 3, Green Continuous
C-ROAD-NOTE Road and Street Names 3, Green Continuous
C-ROAD-BRDG Roadway Bridges 4, Cyan Continuous
L-WALK Pedestrian Walks 3, Green Continuous
L-WALK-BRDG Pedestrian Bridges 4, Cyan Continuous
C-PKNG Parking Lot 3, Green Continuous
C-PKNG-NOTE Parking Lot Notes 3, Green Continuous
C-PKNG-TEXT Parking Lot Text 3, Green Continuous
L-SITE-WATR Site Water Features, Rivers, Streams, 1, Red Continuous
Ponds, and Coastlines
L-SITE-WATR-NOTE Names and Notes 3, Green Continuous
5.3.10 LANDSCAPE LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
L-PIRR-**** Landscape Irrigation Plan Information
L-PPLA-**** Landscape Planting Plan Information
L-DETL-**** Detail Drawings Information
L-SECT-**** Section Drawings Information
L-PSTR-**** Structural Plan Information
L-****-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
L-****-TEXT General Notes and Specifications 3, Green Continuous
L-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
L-****-DIMS Dimensions 2, Yellow Continuous
L-****-SCHD Schedules and Tables of Text 3, Green
Continuous
Project Information Layers
Landscape Planting
L-PLNT-TREE Tree 3, Green Continuous
L-PLNT-EXST Existing Plants to Remain 3, Green Continuous
L-PLNT-DEMO Existing Plants to be Demolished 3, Green Continuous
L-PLNT-GRND Ground Cover and Vines 3, Green Continuous
L-PLNT-SHRB Shrubs & Bushes 5, Blue Continuous
L-PLNT-TURF Lawn Areas 3, Green Continuous
L-PLNT-BEDS Landscape Planting Beds 3, Green Continuous
Landscape Irrigation System
L-IRRG-MAJR Main Irrigation Lines (larger than 2î) 3, Green Continuous
L-IRRG-SPHD Sprinkler Head 6, Magenta Continuous
L-IRRG-PIPE Sprinkler Piping 3, Green Continuous
L-IRRG-EQPM Irrigation Equipment 6, Magenta Continuous
L-IRRG-COVR Irrigation Coverage 3, Green Continuous
L-WALK Walks, Steps, and 3, Green Continuous
L-WALK-PATT Patterns and Cross Hatching 3, Green
Continuous
Site Improvements
L-SITE-FENC Fencing 5, Blue Continuous
L-SITE-WALL Walls 6, Magenta Continuous
L-SITE-DECK Decks 4, Cyan Continuous
L-SITE-BRDG Pedestrian Bridges 4, Cyan Continuous
L-SITE-POOL Pools and Spas 6, Magenta Continuous
5.3.11 CAMPUS MASTER PLAN LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
C-PMST-SYMB Symbols, Arrows, Graphic Scales, etc. 4, Cyan Continuous
C-PMST-LEGN Legend of Building Names & Numbers 3, Green Continuous
C-PMST-NOTE Notes 3, Green Continuous
C-PMST-**** Other Campus Master Plan Information
C-SHDB-LGND Building Legend (in Paper Space) 4, Cyan Continuous
C-SHDB-NOTE Master Plan Notes (in Paper Space) 3,
Green Continuous
Campus Information Layers
C-BLDG-EXST Existing Building Outline 6, Magenta Continuous
C-BLDG-EXST-NOTE Existing Building Number 4, Cyan Continuous
C-BLDG-EXST-PATT Existing Building Hatch Pattern 3, Green Continuous
C-BLDG-TEMP Existing Temporary Building Outline 3, Green Continuous
C-BLDG-TEMP-NOTE Existing Temporary Building Number
3, Green Continuous
C-BLDG-PROP Proposed Building Outline 5, Blue Continuous
C-BLDG-PROP-NOTE Proposed Building Number 4, Cyan Continuous
C-BLDG-PROP-PATT Proposed Building Pattern 1, Red
Continuous
C-ROAD Roads and Streets 6, Magenta Continuous
C-ROAD-CURB Curb Lines 3, Green Continuous
C-ROAD-NOTE Road and Street Names 4, Cyan Continuous
C-ROAD-BRDG Roadway Bridges 6, Magenta Continuous
C-ROAD-GUTR Roadway Gutters 2, Yellow Continuous
L-WALK Pedestrian Walks 4, Cyan Continuous
L-WALK-BRDG Pedestrian Bridges 5, Blue Continuous
C-PKNG-EXST Parking Lot 3, Green Continuous
C-PKNG-EXST-NOTE Parking Lot 3, Green Continuous
C-PKNG-EXST-TEXT Parking Lot Notes (Number of Spaces) 3, Green Continuous
C-PKNG-PROP Proposed Parking Lot 3, Green Continuous
C-PKNG-PROP-NOTE Proposed Parking Lot Number 3,
Green Continuous
C-BLDG-EXST Existing Building Outline 3, Green Continuous
C-BLDG-EXST-NOTE Existing Building Number 3, Green Continuous
C-BLDG-EXST-PATT Existing Building Hatch Pattern 1, Red Continuous
C-BLDG-TEMP Existing Temporary Building Outline 3, Green Continuous
C-BLDG-TEMP-NOTE Existing Temporary Building Number 3, Green Continuous
C-BLDG-TEMP-PATT Existing Temporary Building Hatch
Pattern 1, Red Continuous
C-BLDG-PROP Proposed Building Outline 3, Green Continuous
C-BLDG-PROP-NOTE Proposed Building Number 3, Green Continuous
C-BLDG-PROP-PATT Proposed Building Pattern 1, Red
Continuous
L-SITE-WATR Site Water Features, Rivers, Streams, 5, Blue Continuous
Ponds, and Coastlines
L-SITE-WATR-NOTE Names and Notes 4, Cyan Continuous
5.3.12 UTILITY INFRASTRUCTURE LAYER GUIDELINES
____
Layer Description Color Linetype
____
Drawing Information Layers
C-PUTL-**** Site Utility Plan Information
C-DETL-**** Detail Drawings Information
C-ELEV-**** Elevation Drawings Information
C-SECT-**** Section Drawings Information
C-****-NOTE Notes, Call-outs, and Key Notes 3, Green Continuous
C-****-TEXT General Notes and Specifications 3, Green Continuous
C-****-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
C-****-DIMS Dimensions 6, Magenta Continuous
C-****-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Topographic Plan Information
All topographic plan data is to be contained in a
separate drawing file and incorporated into utility plans via
references files.
Utility Information Layers
P-SSWR Sanitary Sewer System 3, green Continuous
P-SSWR-MHOL Sanitary Sewer Manholes 4, Cyan Continuous
P-SSWR-ELEV Sanitary Sewer Elevations 4, Cyan Continuous
P-SSWR-PIPE Sanitary Sewer Pipe 3, Green Continuous
P-SSWR-NOTE Sanitary Sewer Notes 3, Green Continuous
P-SSWR-EQPM Sanitary Sewer Equipment 6, Magenta Continuous
P-STRM Storm Drain System
P-STRM-MHOL Sanitary Sewer Manholes 4, Cyan Continuous
P-STRM-ELEV Sanitary Sewer Elevations 4, Cyan Continuous
P-STRM-PIPE Sanitary Sewer Pipe 3, Green Continuous
P-STRM-NOTE Sanitary Sewer Notes 3, Green Continuous
P-STRM-EQPM Sanitary Sewer Equipment 6, Magenta Continuous
P-GSWR Grey Water System 3, Green Continuous
P-GSWR-MHOL Grey Water Manholes 4, Cyan Continuous
P-GSWR-ELEV Grey Water Elevations 4, Cyan Continuous
P-GSWR-PIPE Grey Water Pipe 3, Green Continuous
P-GSWR-NOTE Grey Water Notes 3, Green Continuous
P-GSWR-EQPM Grey Water Equipment 6, Magenta Continuous
P-DOMW Domestic Water System 3, Green Continuous
P-DOMW-MHOL Domestic Water Manholes 4, Cyan Continuous
P-DOMW-ELEV Domestic Water Elevations 4, Cyan Continuous
P-DOMW-PIPE Domestic Water Pipe 3, Green Continuous
P-DOMW-NOTE Domestic Water Notes 3, Green Continuous
5.3.12 CONTINUED
____
Layer Description Color Linetype
____
Hot Water (Space Heating) System
M-HOTW-FIXT Chilled Water Surface Features e.g. Manholes 4, Cyan Continuous
M-HOTW-EQPM Hot Water Equipment 5, Blue Continuous
M-HOTW-NOTE Hot Water Notes 3, Green Continuous
M-HOTW-PIPE Hot Water Piping 4, Cyan Continuous
Use when supply & return are shown together,
may NOT be used when layers below are used
M-HOTW-RTRN Hot Water Return Lines 4, Cyan Continuous
M-HOTW-SUPL Hot Water Supply Lines 4, Cyan Continuous
Chilled Water (Space Cooling)System
M-CWRT-FIXT Chilled Water Surface Features e.g. Manholes 4, Cyan Continuous
M-CWRT-EQPM Chilled Water Equipment 5, Blue Continuous
M-CWRT-NOTE Chilled Water Notes 3, Green Continuous
M-CWRT-PIPE Chilled Water Piping 4, Cyan Continuous
Use when supply & return are shown together,
may NOT be used when layers below are used
M-CWRT-RTRN Chilled Water Return Lines 4, Cyan Continuous
M-CWRT-SUPL Chilled Water Supply Lines 4, Cyan Continuous
Natural Gas System
M-NGAS-EQPM Natural Gas Equipment 5, Blue Continuous
M-NGAS-PIPE Natural Gas Pipe 3, Green Continuous
M-NGAS-NOTE Natural Gas Notes 3, Green Continuous
M-NGAS-MHOL Natural Gas Manholes 3, Green Continuous
Communication System
Q-COMM-EQPM Communication Equipment 3, Green Continuous
Q-COMM-WIRE Wiring Cables, Duct Banks & Conduits 3, Green Continuous
Q-COMM-NOTE Communication System Notes 3, Green Continuous
5.2 MINOR GROUP ABBREVIATIONS
All minor group headings shall comply with the following
abbreviation outline:
____
Layer Description
____
ABLT Anchor Bolts
ACID Acid, Alkaline, And Oil Waste Systems
ALRM Alarm System
AREA Area Calculations & Occupancy Info
AUXL Auxiliary Systems
BELL Bell System
BLDG Building Foot Print
BRIN Brine System
CCTV Closed Circuit Television
CHIM Prefabricated Chimneys
CLNG Ceiling Information
CLOK Clock System
COMM Telephone & Communication System
CMPA Compressed Air System
COLS Columns
CO2S Co2 System
CTRL Control & Instrumentation System
CWTR Chilled Water System
DATA Data System
DETL Details
DICT Central Dictation System
DOMW Domestic Hot & Cold Water System
DOOR Doors
DUST Dust & Fume Collection System
DIMS Dimensions
ELEV Interior & Exterior Elevations
ENER Energy Management System
EQPM Equipment
EXHS Exhaust System
FIRE Fire Protection Or Alarm System
FIXT Fixtures
FLOR Floor Information
FNDN Foundation
FRAM Framing Plan (Beams & Joists)
FUEL Fuel System Piping
FURN Furniture
GLAZ Windows & Curtain Walls
GRID Column Grid
GRND Ground (Elec.)And/Or (Planting)
GSWR Grey Water System
HALN Halon System
HOTW Hot Water Heating System
HVAC Hvac System
5.2 MINOR GROUP ABBREVIATIONS (Continued)
____
Layer Description
____
INTC Intercom System
IRRG Irrigation System
LEGN Legend Of Symbols
LLIN Single Line Diagram
LITE
LTNG Lighting Protection System
MACH Machine Shop Equipment
MDGS Medical System
METL Miscellaneous Metal
NGAS Natural Gas & Storage Tanks
NURS Nurse Call System
NOTE Notes, Call Outs, & Keynotes
PGNG Paging System
PKGN Parking
PLNT Planting
POWR Power
PROC Processing System
PROP Property Line
PROT Fire Protection System
Plan Information Minor Groups
PARE Area Calculation Plan Information
PBND Boundary Plan Information
PCLG Ceiling Plan Information
PCOL Column Plan Information
PCOM Communications Plan Information
PCON Controls Plan Information
PDEM Demolition Plan Information
PEQM Equipment Plan Information
PFLR Floor Plan Information
PFND Foundation Plan Information
PHVA HVAC Plan Information
PIRR Irrigation Plan Information
PLGS Large Scale Plan Information
PLIT Lighting Plan Information
PMCH Mechanical Plan Information
PPIP Piping Plan Information
PPLA Planting Plan Information
PPLM Plumbing Plan Information
PROF Roof Plan Information
PSFR Structural Framing Plan Information
PSPR Sprinkler Plan Information
PSTR Structural Plan Information
PSYS System Plan Information
PUTL Site Utility Plan Information
5.2 MINOR GROUP ABBREVIATIONS (Continued)
____
Layer Description
____
REFG Refrigeration System
RISR Riser Diagram Or Plan
ROAD Roads
ROOF Roof
SANR Sanitary Drainage
SCHD Scheduled & Title Block Sheets
SECT Sections
SERT Security System
SHBD Sheet Boarder & Title Block Line Work
SITE Site Improvements
SLAB Slab
STEM Steam Systems
STRM Storm Drain System
SPCL Special System
SPRN Fire Protection Sprinkler System
SSWR Sanitary Sewer
(Manhole, Pumping Station)
STAN Fire Protection Standpipe System
SOUN Sound Or Pa System
SYMB Symbols, Bubbles, And Targets
TEST Test Equipment
TOPO Proposed Contour Lines & Elevations
TVAN Television Antenna System
TREE Tree
TEXT General Notes & Specifications
WALK Walks And Steps
WALL Walls
WATR Domestic Water
5.3 MODIFIERS AND USER DEFINITIONS
____
Layer Description
____
ACCS Access
ALRM Alarm
APPL Appliances
BEAM Beams
BEDS Landscaping Beds
BORE Test Borings
BRDG Bridges
BRNG Bearings & Distance Labels
BUSW Busways
CABL Cable Trays
CARS Graphic Illustration Of Cars
CASE Casework
CDFF Hvac Ceiling Diffusers
CEQP Compressed Air Equipment
CHAR Chairs & Other Seating
CIRC Circuits
CNTR Centerlines
CONP Steam Systems Condensate Piping
CONS Construction Controls
COVR Coverage
CPIP Compressed Air Piping
CURB Curbs
CLNG Ceiling
CTRL Controls
DECK Decking Or Decks
DEMO Existing To Be Removed
DEVC Devices
DIAG Diagram
DIMS Dimensions
DRAN Drainage System Or Indication
DUCT Duct Work
DHED Door Header
EDGE Edge Of Perimeter
ELEV Elevation Or Elevated Surface
(3d Element)
EMER Emergency
EQPM Equipment
EQUI Equipotential System
ESMT Easements, Right-Of-Way & Set Backs
EVTR Elevator Equipment
EXIT Exiting
EXST Existing To Remain
5.3 MODIFIERS AND USER DEFINITIONS (Continued)
____
Layer Description
____
FEED Feeders
FENC Fencing
FILE File Cabinets
FIXD Fixed
FIXT Fixtures
FLDR Floor Drains
FNSH Finishes
FREE Free Standing Or Self Supporting
FULL Full Height
FURN Furniture
FLOR Floor Located
GGEP Fuel Gas General Piping
GPRP Fuel Gas Process Piping
GRID Grid
GRND Ground Cover And Vines
GUTR Gutters
HPIP High Pressure Piping
HRAL Stair & Balcony Hand/Guardrails
HAZW Hazardous Waste Materials
IDEN Identification Tag
INTR Elements On The Interior Of Bldg.
ISLD Islands
JAMB Door And Window Jambs
JOIN Joint
JOIS Joists
LEVL Elevation Changes
LOGO Office Or Project Logo
LPIP Low Pressure Piping
MAJR Major (I.E. Contours)
MINR Minor (I.E. Contours)
MACL Major Depressed Contour Lines
MBND Material Beyond Section Cut
MCUT Material Cut By Section
MICL Minor Depressed Contour Lines
MOVE Movable Elements
MHOL Manholes
NEWW New Of Proposed Work
NICN Not In Contract
NOTE Notes, Call-Outs & Keynotes*
NPLT Nonplot Information & Const. Lines
NUMB Numbering. For Systems; Circuits & Branches
5.3 MODIFIERS AND USER DEFINITIONS (Continued)
____
Layer Description
____
OCCP Occupant Or Employee Name
ODFF Hvac Diffusers
OGEP Fuel Oil General Piping
OPEN Open
OPRP Fuel Oil Process Piping
OTLN Outline
OVHD Overhead
PATT Cross-Hatching And Poche
PACL Proposed Major Contour Lines
PANL Panel Or Equipment Boards
PEQP Process Air Equipment
PICL Proposed Minor Contour Lines
PILE Piles Or Drilled Piers
PILE Piping
PLAY Playground
PLNT Planting
PLOT Plotting Targets & Windows
PNLS Panel System
POLE Pole
POOL Pools And Spas
POWR System Power Designation
PPIP Process Air Piping
PRHT Partial Height
PROP Proposed
ROOF Roof Located
RAIS Raised Floors Or Platform
RBAR Reinforcing Bars
RDME Non Plotting Read Me Information
REFR Reference System
RISR Riser Diagram Or Plan
RFDR Roof Drains
RFEQ Roof Top Exhaust Equipment
RTWL Retaining Wall
RTRN Return Lines
SCHD Schedules And Title Block Sheets
SIGN Signage
SILL Window Sills
SITE Site Located
SMOK Smoke Detectors Or Heat Sensors
SPCL Specialties And Accessories
SPHD Sprinkler Head
SPOT Spot Elevations
SPRT Sport Area Or Equipment
STOR Storage Equipment Or Containers
STRP Striping
5.3 MODIFIERS AND USER DEFINITIONS (Continued)
____
Layer Description
____
STRS Stairs, Escalators And Ladders
SUSP Suspended Elements Or Equipment
SWBD Switch Boards
SWCH Switches
SYMB Symbols, Bubbles And Targets*
SHRB Shrubs And Bushes
SUPL Supply Lines
TEES Main Tees
TEXT General Notes & Specifications
THER Thermostats
TPTN Toilet Partitions
TREE Trees
TTLB Title Block Sheet Name And Number
TURF Lawn Area
UCPT Under Carpet Wiring
UNDR Underground
URAC Underground Raceways
WALL Wall Located
WDWK Woodwork And Cabinets
WIRE Wiring
WKSN Work Stations
WHED Window Header
WATR Water Features
WALK Walks (Pedestrian)
S.0 PROTOTYPE SUBMITTALS
Drawing File BORDER.DWG
____
Layer Description Color Linetype
____
This drawing is the master drawing border that is
referenced (NOT Inserted as a BLOCK) in paper space by all the
project document files. The drawing specific title block text(e.g.
Drawing Number, Drawing Name, File Name, etc.) for the document
files are located in paper space in the document file itself.
Items Drawn in Paper Space
No items shall be drawn in paper space in the Border
Sheet
Items Drawn in Model Space
G-SHBD Sheet Border and Title block Line Work
Includes campus name and logo, and text uniform
to all drawings in document set.
G-SHBD-LW25 Sheet Border & Title Block, light lines 2, Yellow Continuous
G-SHBD-LW35 Sheet Border & Title Block, fine lines 3, Green Continuous
G-SHBD-LW50 Sheet Border & Title Block, medium lines 4, Cyan Continuous
G-SHBD-LW70 Sheet Border & Title Block, heavy
lines 5, Blue Continuous
NOTE:
All drawing specific text, sheet number, sheet title,
revisions etc. shall be included on the individual drawing sheets.
G-SHBD-LOGO Consultants Logo, & Addl. Graphics Items
G-SHBD-LOGO-LW35 Consultants Logo, etc.: light lines 2, Yellow Continuous
G-SHBD-LOGO-LW35 Consultants Logo, etc.: fine lines 3, Green Continuous
G-SHBD-LOGO-LW35 Consultants Logo, etc.: medium lines 4, Cyan Continuous
G-SHBD-LOGO-LW70 Consultants Logo, etc.: heavy lines
5, Blue Continuous
Note:
It is not the intention to require all line weights
and their corresponding layers be used in CSU documents. Only
the layers needed to generate the appropriate line types for the
title sheet and graphics should be included.
S.0.1 Typical Drawing File Set Up
Drawing File "TYPICAL".DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
G-SHBD-TTLB Title Block Text
G-SHBD-TTLB-LW25 Title Block Text, light lines 2, Yellow Continuous
G-SHBD-TTLB-LW35 Title Block Text, fine lines 3, Green Continuous
G-SHBD-TTLB-LW35 Title Block Text, medium lines 4, Cyan Continuous
G-SHBD-TTLB-LW70 Title Block Text, heavy lines 5,
Blue Continuous
G-SHBD-SEAL Consultants Professional Stamp & Signature
G-SHBD-SEAL-LW25 Consultants Stamp, light lines 2, Yellow Continuous
G-SHBD-SEAL-LW35 Consultants Stamp, fine lines 3, Green Continuous
G-SHBD-SEAL-LW50 Consultants Stamp, medium lines 4, Cyan Continuous
G-SHBD-SEAL-LW70 Consultants Stamp, heavy lines 5,
Blue Continuous
*-****-TEXT General Notes and Specifications 3, Green Continuous
*-****-SCHD Schedules and Tables of Text 6, Magenta
Continuous
X-Ref master sheet border: BORDER.DWG
Items Drawn in Model Space
Drawing Information Layers
*-****-NOTE Notes, Call-outs, and Key Notes 3, Green Continuous
*-****-SYMB Symbols, Bubbles, and Targets 4, Cyan Continuous
*-****-DIMS Dimensions 2, Yellow Continuous
*-DETL-**** Detail Drawings Information
*-ELEV-**** Elevation Drawings Information
*-SECT-**** Section Drawings Information
Building Information Layers
All layers representing the physical components of the project
Note:
Only the layers needed to generate the appropriate
graphics should be included.
S.1 SMALL BUILDING RENOVATION PROJECT PROTOTYPE
SUBMITTAL
This submittal prototype would be appropriate for
a smaller project with a single designer or a small design team.
The complete plan model of the project exists in a single file
making possible the simultaneous manipulation of all the major
elements of the building. The other dependent files contain the
projects notation and a display of the appropriate layers from
the model attached as an external reference file.
Where a single model would be untenable for a larger
design team the large project prototype S.3 would be a more appropriate
prototype.
Hard copy Submittals
Drawings
A2.1 Floor Plan with Door Schedule
A2.2 Equipment and Case Work Plan and Schedule
A3.1 Interior Elevations and Sections
A5.1 Architectural Ceiling Plan
A9.1 Construction Details
E2.1 Electrical Plan (with half toned floor
plan) and Fixture Schedule
Electronic Submittals
The drawing file names have been shown in a more
self explanatory form to aid in following the logic of this prototype.
The actual submittal should follow the file naming convention
as shown in section 3.8.
Drawings
BORDER.DWG Master Sheet Border Drawing
See S.0.1 Model space
contains drawing border and title block information.
A20.DWG Master Drawing: External Reference File; None
See S.1.1 Floor
Plan Model with
Ceiling Plan and Fixtures
A21.DWG Document File: External Reference File; A20.DWG.
See S.1.2 Floor Plan Document File
Model space contains external reference with drawing symbols and notation.
Paper space contains
door Schedule and drawing border and title block information.
A22.DWG Document File: External Reference File; A20.DWG.
See S.1.3 Equipment & Casework Plan
Model space contains external reference with drawing symbols and notation.
Paper space
contains Equipment Schedule
and drawing border and title block information.
A31.DWG Document File: External Reference File; None
See S.1.4 Elevations & Sections
Model space contains interior elevations with drawing symbols and notation.
Paper space contains drawing border
and title block information.
A51.DWG Document File: External Reference File; A20.DWG
See S.1.5 Reflected Ceiling Plan
Model space contains external reference with drawing symbols and notation.
Paper space contains drawing border
and title block information.
S.1 (Continued)
A91.DWG Document File: External Reference File; None.
See S.1.6 Architectural Details
Model space contains details, symbols and notation.
Paper space contains drawing border and title block
information.
E21.DWG Document File: External Reference File; A20.DWG.
See S.1.7 Electrical Lighting & Power Plan
Model space contains external reference with drawing symbols and notation.
Paper space contains fixture schedule,
drawing border, and title block information.
SPC.TXT ASCII Text File
Complete text of project manual and specifications.
Division O not required.
A20.LOG ASCII Text File, Drawing File Description
of A20.DWG (see section 2.2)
A21.LOG ASCII Text File, Drawing File Description
of A21.DWG (see section 2.2)
A22.LOG ASCII Text File, Drawing File Description
of A22.DWG (see section 2.2)
A31.LOG ASCII Text File, Drawing File Description
of A31.DWG (see section 2.2)
A51.LOG ASCII Text File, Drawing File Description
of A51.DWG (see section 2.2)
A91.LOG ASCII Text File, Drawing File Description
of A91.DWG (see section 2.2)
E21.LOG ASCII Text File, Drawing File Description
of E21.DWG (see section 2.2)
S.1.1 SMALL BUILDING SUBMITTAL
MASTER DRAWING
Drawing File A20.DWG
____
Layer Description Color Linetype
____
All elements located in Model Space
A-WALL Walls 6, Magenta Continuous
A-WALL-CNTR Wall Center Lines 2, Yellow Center
A-WALL-WHED Window Headers 3, Green Continuous
A-WALL-DHED Door Headers 3, Green Continuous
A-WALL-JAMB Door & Window Jambs 6, Magenta Continuous
A-WALL-PATT Wall Insulation, Hatch Patterns & Fill 1, Red Continuous
A-WALL-EXST Existing Wall to Remain 4, Cyan Continuous
A-WALL-DEMO Existing Wall to be Removed 4, Cyan Dashed
A-DOOR Doors 4, Cyan Continuous
A-GLAZ Window, Curtain Walls, Glazed Partitions 3,
Green Continuous
A-FLOR-DEMO Floor Areas to be Demolished 4, Cyan
Dashed
A-EQPM-FIXD Fixed Equipment (CSU Type 1) 4, Cyan Continuous
A-EQDM-MOVE Moveable Equipment (CSU Type 2) 3, Green
Dashed
A-CLNG-OVHD Ceiling Elements, soffits, and Bulkheads 4, Cyan Hidden
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 1, Red Continuous
S-COLS Structural Columns 6, Magenta Continuous
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
E-LITE-CLNG Ceiling Mounted Lighting 5, Blue Continuous
E-LITE-EMER Emergency Lighting 5, Blue Continuous
F-SPRN-SPHD Sprinkler Heads 5, Blue Continuous
F-PROT-SMOK Smoke Detectors or Heat Sensors 5, Blue
Continuous
M-CDFF Ceiling Diffusers 2, Yellow Continuous
S.1.2 SMALL BUILDING SUBMITTAL
FLOOR PLAN
Drawing File A21.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PFLR-TEXT Floor Plan General Notes and Specifications
3, Green Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PFLR-NOTE Floor Plan Notes, Call-Outs, and Key Notes 3, Green Continuous
A-PFLR-SYMB Floor Plan Symbols, Bubbles and Targets 4, Cyan Continuous
A-PFLR-DIMS Floor Plan Dimensions 2, Yellow Continuous
Building Information Layers
A20:A-WALL Walls 6, Magenta Continuous
A20:A-WALL-CNTR Wall Center Lines 2, Yellow Center
A20:A-WALL-WHED Window Headers 3, Green Continuous
A20:A-WALL-DHED Door Headers 3, Green Continuous
A20:A-WALL-JAMB Door & Window Jambs 6, Magenta Continuous
A20:A-WALL-PATT Wall Insulation, Hatch Patterns & Fill 1, Red Continuous
A20:A-WALL-EXST Existing Wall to Remain 4, Cyan Continuous
A20:A-WALL-DEMO Existing Wall to be Removed 4,
Cyan Dashed
A20:A-DOOR Doors 4, Cyan Continuous
A-DOOR-IDEN Door Number Symbol 4, Cyan Continuous
A20:A-GLAZ Window, Curtain Walls, Glazed Partitions 3, Green Continuous
A-GLAZ-IDEN Window Number Symbols 4, Cyan Continuous
A20:A-FLOR-DEMO Floor
Areas to be Demolished
A20:S-COLS Structural Columns 6, Magenta Continuous
A20:S-GRID Column Grid 2, Yellow Center
A20:S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
A20:LAYR Indicates Layer from External
Reference File (A20: indicates file
A20.DWG is being referenced)
S.1.3 SMALL BUILDING SUBMITTAL
EQUIPMENT & CASEWORK PLAN
Drawing File A22.DWG
____
Layer Description Color Linetype
____
Items Contained in Paper Space
See Section S.0.1 for typical general layer information
A-PEQM-SCHD Equipment and Casework Schedules 3, Green Continuous
A-PEQM-TEXT Equipment General Notes and Specifications
3, Green Continuous
Items Contained in Model Space
A-PEQM-NOTE Equipment Notes, Call-Outs, and Key Notes 3, Green Continuous
A-PEQM-SYMB Equipment Symbols, Bubbles and Targets 4, Cyan Continuous
A-PEQM-DIMS Equipment Dimensions 2, Yellow Continuous
A20:A-WALL Walls 6, Magenta Continuous
A20:A-WALL-WHED Window Headers 3, Green Continuous
A20:A-WALL-DHED Door Headers 3, Green Continuous
A20:A-WALL-JAMB Door & Window Jambs 6, Magenta Continuous
A20:A-WALL-EXST Existing Wall to Remain 4, Cyan
Continuous
A20:A-DOOR Doors 4, Cyan Continuous
A20:A-GLAZ Window, Curtain Walls, Glazed Partitions
3, Green Continuous
A20:S-COLS Structural Columns 6, Magenta Continuous
A20:S-GRID Column Grid 2, Yellow Center
A20:S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
A20:A-EQPM-FIXD Fixed Equipment (CSU Type 1) 4, Cyan Continuous
A20:A-EQPM-MOVE Moveable Equipment (CSU Type 2)
3, Green Dashed
A-EQPM-IDEN Equipment Identifiers
A20:LAYR Indicates Layer from External
Reference File (A20: indicates file
A20.DWG is being referenced)
S.1.4 SMALL BUILDING SUBMITTAL
SECTIONS & ELEVATIONS
Drawing File A31.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-ELEV-TEXT General Notes and Specifications 3, Green Continuous
A-ELEV-SCHD Schedules and Tables of Text 6, Magenta
Continuous
A-SECT-TEXT General Notes and Specifications 3, Green Continuous
A-SECT-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-ELEV-NOTE Elevation Notes, Call-Outs, 3, Green Continuous
A-ELEV-KEYN ConDoc Keynotes 3, Green Continuous
A-ELEV-SYMB Elevation Symbols, Bubbles and Targets 6, Magenta Continuous
A-ELEV-DIMS Elevation Dimensions 2, Yellow Continuous
A-SECT-NOTE Section Notes, Call-Outs, 3, Green Continuous
A-SECT-KEYN ConDoc Keynotes 3, Green Continuous
A-SECT-SYMB Section Symbols, Bubbles and Targets 6, Magenta Continuous
A-SECT-DIMS Section Dimensions 2, Yellow Continuous
Project Information Layers
A-ELEV-OTLN Building (or space) Outline 6, Magenta Continuous
A-ELEV-FNSH Extents of Finishes, Woodwork and Trim 4, Cyan Continuous
A-ELEV-PATT Elevation Cross-Hatching And Poche 1,
Red Continuous
A-SECT-MCUT Materials Cut by Section 6, Magenta Continuous
A-SECT-MBNT Materials Beyond Section Cut 4, Cyan Continuous
A-SECT-OTLN Building (or space) Outline 5, Blue Continuous
A-SECT-FNSH Extents of Finishes, Woodwork and Trim 4, Cyan Continuous
A-SECT-PATT Elevation Cross-Hatching And Poche 1,
Red Continuous
S.1.5 SMALL BUILDING SUBMITTAL
REFLECTED CEILING PLAN
Drawing File A51.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PCLG-TEXT General Notes and Specifications 3, Green Continuous
A-PCLG-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
A-PCLG-NOTE Ceiling Plan Notes, Call-Outs, 3, Green Continuous
A-PCLG-KEYN ConDoc Keynotes 3, Green Continuous
A-PCLG-SYMB Ceiling Plan Symbols, Bubbles and Targets 4, Cyan Continuous
A-PCLG-DIMS Ceiling Plan Dimensions 2, Yellow Continuous
A20:A-WALL--FULL Full Height Walls 6, Magenta Continuous
A20:A-WALL--WHED Window Headers 3, Green Continuous
A20:A-WALL-DHED Door Headers 3, Green Continuous
A20:A-CLNG Ceiling Elements, soffits, and Bulkheads 3, Green Continuous
A20:A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 1,
Red Continuous
A20:S-COLS Structural Columns 6, Magenta Continuous
A20:S-GRID Column Grid 3, Green Continuous
A20:S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
A20:M-CDFF Ceiling Diffusers 2, Yellow Continuous
A20:E-LITE-CLNG Ceiling Mounted Lighting 3, Green Continuous
A20:E-LITE-EMER Emergency Lighting 5, Blue Continuous
A20:F-SPRN-SPHD Fire Sprinkler Heads 5, Blue Continuous
A20::F-PROT-SMOK Smoke Detectors or Heat Sensors
5, Blue Continuous
A20:LAYR Indicates Layer from External
Reference File (A20: indicates file
A20.DWG is being referenced)
S.1.6 SMALL BUILDING SUBMITTAL
ARCHITECTURAL DETAILS
Drawing File A91.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-DETL-TEXT General Notes and Specifications 3, Green Continuous
A-DETL-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-DETL-NOTE Detail Notes, Call-Outs, 3, Green Continuous
A-DETL-KEYN ConDoc Keynotes 3, Green Continuous
A-DETL-SYMB Detail Symbols, Bubbles and Targets 6, Magenta Continuous
A-DETL-DIMS Detail Dimensions 2, Yellow Continuous
A-DETL-MCVT Materials Cut by Section 4, Cyan Continuous
A-DETL-MBNT Materials Beyond Section Cut 4, Cyan Continuous
A-DETL-PATT Detail Cross-Hatching And Poche 1, Red
Continuous
Graphic layers may be further segregated by appropriate
layer modifiers if necessary, i.e.:
A-DETL-WALL Walls Shown in Elevation View 2, Yellow Continuous
A-DETL-DOOR Doors Shown in Elevation View 2, Yellow
Continuous
S.1.7 SMALL BUILDING SUBMITTAL
ELECTRICAL LIGHTING & POWER PLAN
Drawing File E21.DWG Electrical Plan
____
Layer Description Color Linetype
____
Item Drawn in Paper Space
See Section S.0.1 for typical general layer information
E-PLIT-TEXT General Notes and Specifications 3, Green Continuous
E-PLIT-SCHD Schedules and Tables of Text 3, Green
Continuous
Note: This project example shows all electrical description
information on layers E-PLIT-**** since all electrical elements
are on a single drawing. More complex projects could also utilize
layers E-PPOW, E-PCOM, E-PAUX to illustrate lighting plans, power
plans, communications plans, and auxiliary plans independently.
Items Drawn in Model Space
E-PLIT-NOTE Lighting Plan Notes, Call-Outs, 3, Green Continuous
E-PLIT-KEYN ConDoc Keynotes 3, Green Continuous
E-PLIT-SYMB Lighting Plan Symbols, Bubbles and Targets 4, Cyan Continuous
E-PLIT-DIMS Lighting Plan Dimensions 2, Yellow Continuous
A20:A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A20:A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A20:A-WALL-DHED Door Headers 214, Grey Magenta
Continuous (half tone)
A20:A-CLNG-OVHD Major Ceiling Elements Shown on Floor Plan 134, Grey Cyan Continuous (half tone)
A20:A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 14,
Grey Red Continuous (half tone)
A20:S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
A20:S-GRID Column Grid 174, Grey Yellow Center (half tone)
A20:S-GRID-IDEN Column Grid Tags 134, Grey Cyan
Continuous (half tone)
A20:M-CDFF Ceiling Diffusers 174, Grey Blue Continuous
(half tone)
A20:E-LITE-CLNG Ceiling Mounted Lighting 3, Green Continuous
A20:E-LITE-EMER Emergency Lighting 5, Blue Continuous
S.1.7 SMALL BUILDING SUBMITTAL (Continued)
E-LITE-SWCH Lighting Switches 5, Blue Continuous
E-LITE-WIRE Wiring and Conduit 4, Cyan Continuous
E-LITE-NUMB Lighting Circuit Numbers 4, Cyan Continuous
E-LITE-IDEN Luminaire Identification and Text 3,
Green Continuous
E-POWR Power Outlets 5, Blue Continuous
E-POWR-NUMB Power Circuit Numbers 4, Cyan Continuous
E-POWR-WIRE Power Wiring and Conduit 4, Cyan Continuous
A20:FF-SPRN-SPHD Sprinkler Heads 214, Grey Magenta
Continuous (half tone)
A20:F-PROT-SMOK Smoke Detectors and Heat Sensors 5, Blue Continuous
A20:F-PROT-WIRE Fire Protection Wiring 4, Cyan
Continuous
A20:A-EQPM-FIXD Fixed Equipment (CSU Type 1) W/ Elec. Connection 3, Green Continuous
A20:A-EQPM-MOVE Moveable Equipment (CSU Type 2)W/
Elec. Con. 3, Green Continuous
S.2 CAMPUS UTILITY MAP PROTOTYPE SUBMITTAL
This prototype is intended for a campus wide infrastructure
map.
All disciplines and infrastructure elements are contained
in drawing files that cover the full extent of the campus. Individual
map pages or drawing sheets that represent a smaller portion of
the campus are created via drawing files, e.g. MAPX, that contain
a title sheet (BORDER.DWG and sheet specific text) and viewport
set to display the appropriate portions of external reference
files, e.g. UTILS. DWG, CAMPMAP.DWG, etc.
Maintaining a seamless geographically contiguous
database across the full extent of a campus while avoiding unworkably
large drawing files are issues that are addressed by this prototype
in addition to the always important issue of a coherent structure
for drawing data. A similar approach should be utilized for all
large area maps, or drawing files are to large to reasonably
be dealt with in a single file.
Hard copy Submittals
Drawing
INDEX Campus wide Mapping indicating Map Pages
MAP"X" Individual Map Pages Covering a
Segment of Campus in Detail, Typically 1î-20í
scale
Electronic Submittals
The drawing file names have been shown in a more
self explanatory form to aid in following the logic of this prototype.
The actual submittal should follow the file naming convention
as shown in section 3.8.
BORDER.DWG Master Sheet Border Drawing
See S.0.1 Model Space contains drawing border &
title block.
UTILS.DWG: Master File, External Reference Files: None
See S.2.1 No Paper Space Component
Model Space Contains all Campus Utility Information
in a single contiguous file
CAMPMAP.DWG: Master File, External Reference Files, Name
See S.2.2 No Paper Space Component
Model Space contains plan view of major campus infrastruture, Building Outlines, Roads and Streets Hardscape
When the scope and detail of a mapping project
generate files beyond 3-5 megabytes an additional file(s) shall
be created to contain the finer detail with major plan information
as shown above remaining in CAMPMAP.DWG.
CONTOUR.DWG: Master File, External Reference Files, None
See S.2.3 No Paper Space Component
Model Space Contains contour lines, Elevation Indicators,
and Notation of Entire Campus
PLANT.DWG: Master File, External Reference Files, None
See S.2.4 No Paper Space Component
Model Space Contains Campus wide Map of Major Vegetation
S.2 CAMPUS UTILITY MAP (Continued)
MAPX.DWG: Document File, External References;
See S.2.5 UTILS.DWG, CAMPMAP.DWG, CAMPDETL.DWG, CONTOUR.DWG, PLANT.DWG, BORDER.DWG
Paper Space contains BORDER.DWG, title block information, and view port for reference files.
Model space contains X refs
Drawing view set to MAPX, displaying appropriate
area of master drawings.
INDEX.DWG: Document File, External References: CAMPMAP.DWG
See S.2.6 Paper Space Contains drawing border, title block, legends and map keys
Model space contains x refs and grid lines indicating
map pages.
KEYMAP.DWG: Utility File, External References, None
See S.2.7 This drawing file is preformatted for use with Auto CADís Advanced Data Extension (ADE) to generate additional custom maps
No paper Space Component
Model Space Contains a simple drawing of major campus infrastructure (campus boundary, Major Buildings and Roads)
Present Views (named ìMAPXî) for each
Map Page
UTILS.LOG: ASC11 Text File: Drawing file description
of UTILS.DWG (see 2.2 )
CAMPMAP.LOG: ASC11 Text File: Drawing file description
of CAMPMAP.DWG (see 2.2)
COUNTOUR.LOG: ASC11 Text File: Drawing file description
of COUNTOUR.DWG (see 2.2 )
PLANT.LOG: ASC11 Text File: Drawing file description
of PLANT.DWG (see 2.2)
MAPX.LOG: ASC11 Text File: Drawing file description
of MAPX.DWG (see 2.2)
KEYMAP.LOG: ASC11 Text File: Drawing file description
of KEYMAP.DWG (see 2.2)
INDEX.LOG: ASC11 Text File: Drawing file description
of INDEX.DWG (see 2.2)
S.2.1 CAMPUS UTILITY MAP
Drawing File UTILS.DWG
All items drawn in model space
____
Layer Description Color Linetype
____
Drawing Information Layers
See Section S.0.1 for typical general layer information
U-PUTL-**** Site Utility Plan Information
U-DETL-**** Detail Drawings Information
U-ELEV-**** Elevation Drawings Information
U-SECT-**** Section Drawings Information
*-****-NOTE Notes, Call-outs, and Key Notes 3, Green Continuous
*-****-TEXT General Notes and Specifications 3, Green Continuous
*-****-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
*-****-DIMS Dimensions 6, Magenta Continuous
*-****-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Utility Information Layers
Sanitary Sewer System
P-SSWR-FIXT S.S. Above Ground Elements, e.g. Manholes 4, Cyan Continuous
P-SSWR-PIPE Sanitary Sewer Pipe 3, Green Continuous
P-SSWR-NOTE Sanitary Sewer Notes 3, Green Continuous
P-SSWR-EQPM Sanitary Sewer Equipment 6, Magenta Continuous
Storm Drain System
P-STRM-FIXT S.W. Above Ground Elements, e.g. Manholes 4, Cyan Continuous
P-STRM-PIPE Storm Drain Pipe 3, Green Continuous
P-STRM-NOTE Storm Drain Notes 3, Green Continuous
P-STRM-EQPM Storm Drain Equipment 6, Magenta Continuous
Grey Water System
P-GSWR-FIXT G.W. Above Ground Elements, e.g. Manholes 4, Cyan Continuous
P-GSWR-PIPE Grey Water Pipe 3, Green Continuous
P-GSWR-NOTE Grey Water Notes 3, Green Continuous
P-GSWR-EQPM Grey Water Equipment 6, Magenta Continuous
P-DOMW Domestic Water System 3, Green Continuous
P-DOMW-FIXT D.W. Above Ground Elements, e.g. Manholes 4, Cyan Continuous
P-DOMW-PIPE Domestic Water Pipe 3, Green Continuous
P-DOMW-NOTE Domestic Water Notes 3, Green Continuous
S.2.1 CAMPUS UTILITY MAP (Continued)
____
Layer Description Color Linetype
____
Hot Water (Space Heating) System
M-HOTW-EQPM Hot Water Equipment 5, Blue Continuous
M-HOTW-FIXT H.W. Above Ground Elements, e.g. Manholes 5, Blue Continuous
M-HOTW-RTRN Hot Water Return Lines 4, Cyan Continuous
M-HOTW-SUPL Hot Water Supply Lines 4, Cyan Continuous
Chilled Water System
M-CWTR-EQPM Chilled Water Equipment 5, Blue Continuous
M-CWRT-FIXT C.W. Above Ground Elements, e.g. Manholes 5, Blue Continuous
M-CWRT-NOTE Chilled Water Notes 3, Green Continuous
M-CWTR-RTRN Chilled Water Return Lines 4, Cyan Continuous
M-CWTR-SUPL Chilled Water Supply Lines 4, Cyan Continuous
M-NGAS Natural Gas System 3, Green Continuous
M-NGAS-ELEV Natural Gas Elevations 3, Green Continuous
M-NGAS-PIPE Natural Gas Pipe 3, Green Continuous
M-NGAS-NOTE Natural Gas Notes 3, Green Continuous
M-NGAS-MHOL Natural Gas Manholes 3, Green Continuous
Q-COMM Communication System 3, Green Continuous
Q-COMM-EQPM Communication Equipment 3, Green Continuous
Q-COMM-WIRE Wiring Cables, Duct Banks & Conduits 3, Green Continuous
Q-COMM-NOTE Communication System Notes
S.2.2 CAMPUS UTILITY MAP
Drawing CAMPMAP.DWG:
All elements are drawn in Model Space
____
Layer Description Color Linetype
____
C-BLDG Building Outline 6, Magenta Continuous
(A single closed polyline per building)
C-BLDG-IDEN Building Identification Numbers 4, Cyan Continuous
C-BLDG-TEMP Temporary Building Outline 4, Cyan Dashed
C-ROAD Roads and Streets 5, Blue Continuous
C-ROAD-CURB Curb Lines 5, Blue Continuous
C-ROAD-GUTR Roadway Gutters 3, Green Continuous
C-ROAD-IDEN Road and Street Names 4, Cyan Continuous
C-ROAD-BRDG Roadway Bridges 6, Magenta Continuous
C-ROAD-STRP Roadway Striping 3, Green Hidden
C-PKNG Parking Lots 3, Green Continuous
C-PKNG-TEMP Temporary Parking Lots 3, Green Dashed
C-PKNG-IDEN Parking Lot Identification Numbers 4, Cyan Continuous
C-PKNG-STRP Parking Lot Striping 3, Green Hidden
C-PKNG-NOTE Parking Lot Notes and Collects 3, Green
Continuous
L-SITE-IDEN Site Features Identification 4, Cyan Continuous
L-SITE-FENC Fencing 5, Blue Continuous
L-SITE-BRDG Pedestrian Bridges 6, Magenta Continuous
L-SITE-WALK Pedestrian Walkways 5, Blue Continuous
L-SITE-FENC Fencing 5, Blue Continuous
L-SITE-POOL Pools and Spas 6, Magenta Continuous
L-SITE-SPRT Sports Fields 5, Blue Continuous
L-SITE-WATR Water Features (Rivers, Streams, &
Lakes) 6, Magenta Continuous
S.2.3 CAMPUS UTILITY MAP
Drawing CONTOUR.DWG:
All elements shown in model space
C-TOPO-SPOT Spot Elevations (Tick Marks & Text) 3, Green Continuous
C-TOPO-MAJR Major Contour Lines 5, Blue Dash Dot
C-TOPO-MAJR-TEXT Major Contour Lines Text (Elevation) 3, Green Continuous
C-TOPO-MINR Minor Contour Lines 4, Cyan Dash Dot
C-TOPO-MINR-TEXT Minor Contour Lines Text (Elevation) 3, Green Continuous
C-TOPO-DEMO Existing Contour Lines to be Changed
2, Yellow 2 Dashed
C-TOPO-NOTE Topographic Survey Notes 3, Green Continuous
C-TOPO-MACL Major Depressed Counter Lines (wetlands) 5, Blue 2XDash Dot
C-TOPO-MACL-TEXT Major Depressed Counter Lines Text 3, Green Continuous
C-TOPO-MICL Minor Depressed Contour Lines (wetlands) 4, Cyan 2XDash Dot
C-TOPO-MICL-TEXT Minor Depressed Counter Lines Text 3, Green Continuous
C-TOPO-RTWL Retaining Wall 6, Magenta Continuous
S.2.4 CAMPUS UTILITY MAP
____
Layer Description Color Linetype
____
Drawing PLANT.DWG
All items drawn in model space
L-PLNT-TREE Tree 5, Blue Continuous
L-PLNT-GRND Ground Cover and Vines 3, Green Continuous
L-PLNT-SHRB Shrubs & Bushes 5, Blue Continuous
L-PLNT-TURF Lawn Areas 3, Green Continuous
L-PLNT-BEDS Landscape Planting Beds 3, Green Continuous
S.2.5 CAMPUS UTILITY MAP
____
Layer Description Color Linetype
____
Drawing File MAPX.DWG
Individual Map Pages
Each map page file shall be zoomed to show the appropriate
portion (MAPX) of the master files. Zoomed view shall be saved
as a named view, ìMAPXî
Items drawn in Paper Space
See Section S.0.1 for typical general layer information
Items drawn in Model Space
All layers from external references files
UTILS.DWG
CAMPMAP.DWG
CONTOUR.DWG
PLANT.DWG
S.2.6 CAMPUS UTILITY MAP
____
Layer Description Color Linetype
____
Drawing File INDEX.DWG
Items drawn in Paper Space
See Section S.0.1 for typical general layer information
Items drawn in Model Space
Simplified version of campus map, typically showing
campus boundary, major roads and buildings. Indicate map page
coverage
INDX-BLDG Building Outlines
INDX-ROAD Roads and Streets
INDX-PROP Property Line/Campus Boundary
INDX-GRID Map Page Grid Lines
INDX-**** Additional Layers as Needed
S.2.7 CAMPUS UTILITY MAP
____
Layer Description Color Linetype
____
Drawing File KEYMAP.DWG
This drawing file is preformatted for use with Auto CADís Advanced Data Extension (ADE) to generate additional custom maps
No Paper Space Component
Items Drawn in Model Space
KEYM-PROP Property Line/Campus Boundary 5, Blue
2 Dash
KEYM-BLDG Building Outlines, Show only Major Buildings 6, Magenta Continuous
Necessary to indicate campus layout
KEYM-ROAD Roads and Streets, Show only major roads & 5, Blue Continuous
streets necessary to indicate campus layout
KEYM-**** Additional layers as needed to indicate
general campus layout
S.3 MAJOR BUILDING PROJECT CONSTRUCTION DOCUMENT
SET
This submittal prototype differs from S.1 in that
rather than maintain a common database via a master model (See
Drawing A2.0 in S.1) the complete database (or model) is contained
in a series of discipline specific files that refer on each other
to show the disciplines in relationship to each other. The ultimate
database is equally complete and free of redundancies but more
amenable to a diverse and widespread design group that would need
to work on many disciplines and files simultaneously.
Hard copy Submittals
Drawings
Hard Copy Submittals are equivalent to the electronic
.DWG submittals below with the exception of BORDER.DWG (the master
title sheet) which has no hard copy equivalent.
Electronic Submittals
The drawing file names have been shown in a more
self explanatory form to aid in following the logic of this prototype.
The actual submittal should follow the file naming convention
as shown in section 3.8.
Drawing Files
Drawing Name Drawing Description CAD Standards
Section #
BORDER.DWG Sheet Border Drawing S.0.1
CGRAD1.DWG Civil:
Grading Plan S.3.C1
CSITE1.DWG Civil: Site Plan S.3.C2
CUTIL1.DWG Civil: Site Utilities S.3.C3
LSITE1.DWG Landscape: Landscape Plan S.3.L1
LIRIG1.DWG Landscape: Irrigation Plan S.3.L2
AFLOR1.DWG Architectural: Floor Plan S.3.A1
ACLG1.DWG Architectural: Reflected Ceiling Plan
S.3.A2
AROOF1.DWG Architectural: Roof Plan S.3.A3
LGFLR1.DWG Architectural: Enlarged Floor Plan S.3.A4
e.g. Stair Plan, Toilet Plans, etc.
AEQUIP1.DWG Architectural: Equipment Plan S.3.A5
AELEV1.DWG Architectural: Elevations (Interior &
Exterior) S.3.A6
ASECT1.DWG Architectural: Sections S.3.A7
S.3 MAJOR BUILDING PROJECT CONSTRUCTION DOCUMENT
SET (Continued)
Drawing Name Drawing Description CAD Standards
Section #
ADETL1.DWG Architectural: Details S.3.A8
ADEMO1.DWG Architectural: Demolition Plan S.3.A9
AREA1.DWG Architectural: Occupancy Plan S.3.A10
FNDN1.DWG Structural: Foundation Plans S.3.S1
SFRAM1.DWG Structural: Framing Plans S.3.S2
COLGRID.DWG Structural: Column Plans S.3.S3
SELEV1.DWG Structural: Elevations S.3.S4
SDETL1.DWG Structural: Details S.3.S5
MHVAC1.DWG Mechanical: HVAC Plan S.3.M1
MPIPE1.DWG Mechanical: Piping Plan S.3.M2
MROOF1.DWG Mechanical: Roof Plan S.3.M3
MCNTRL1.DWG Mechanical: Controls Plan S.3.M4
LGMCH1.DWG `Mechanical: Enlarged Plan S.3.M5
PLUMB1.DWG Plumbing: Plumbing Plan S.3.P1
PRISR1.DWG Plumbing: Riser Diagrams S.3.P2
FSUPR1.DWG Fire Suppression: Fire Suppression Plan
S.3.F1
FRISR1.DWG Fire Suppression: Riser Diagrams S.3.F2
ELITE1.DWG Electrical: Lighting Plan S.3.E1
EPOWR1.DWG Electrical:
Power Distribution Plan S.3.E2
ERISR1.DWG Electrical: Riser Diagram S.3.E3
QCOMM1.DWG TeleCom:
Communication Systems Plan S.3.Q1
S.3 MAJOR BUILDING PROJECT CONSTRUCTION DOCUMENT
SET (Continued)
Text Files
SPC.TXT ASCII Text File
Complete text of project manual and specifications.
Division O not required.
BORDER.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
CGRAD1.LOG ASCII
Text File, Drawing File Description (see section 2.2 )
CSITE1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
CUTIL1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
LSITE1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
LIRIG1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
AFLOR1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
ACLG1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
AROOF1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
LGFLR1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
AEQUIP1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
AELEV1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
ASECT1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
ADETL1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
ADEMO1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
AREA1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
FNDN1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
SFRAM1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
COLGRID.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
SELEV1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
SDETL1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
MHVAC1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
MPIPE1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
MROOF1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
S.3 MAJOR BUILDING PROJECT CONSTRUCTION DOCUMENT
SET (Continued)
MCNTRL1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
LGMCH1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
PLUMB1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
PRISR1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
FSUPR1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
FRISR1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
ELITE1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
EPOWR1.LOG ASCII
Text File, Drawing File Description (see section 2.2 )
ERISR1.LOG ASCII Text File, Drawing File Description
(see section 2.2 )
QCOMM1.LOG ASCII Text File, Drawing File Description (see section 2.2 )
S.3.C1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Civil: Grading Plan
Drawing File: CGRAD1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
C-PGRD-TEXT General Notes and Specifications 3, Green Continuous
C-PGRD-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
C-PGRD-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
C-PGRD-TEXT General Notes and Specifications 3, Green Continuous
C-PGRD-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
C-PGRD-DIMS Dimensions 6, Magenta Continuous
Project Information Layers
C-GRID Grid Lines (California Coordinates) 1, Red Continuous
C-GRID-NOTE Grid Coordinates and Notes 3, Green Continuous
C-BLDG-ELEV Building Elevations 2, Yellow Continuous
C-BLDG-IDEN Building Annotations 2, Yellow Continuous
C-PROP Property Line (Campus Boundary) 4, Cyan Phantom
C-PROP-NOTE Property Line Notes 5, Blue Continuous
C-PROP-ESMT Easements 6, Magenta Continuous
C-TOPO-SPOT Spot Elevations (Tick Marks & Text) 3, Green Continuous
C-TOPO-MAJR Major Contour Lines 6, Magenta Dash Dot
C-TOPO-MAJR-TEXT Major Contour Lines Text (Elevation) 3, Green Continuous
C-TOPO-MINR Minor Contour Lines 4, Cyan Dash Dot
C-TOPO-MINR-TEXT Minor Contour Lines Text (Elevation) 3, Green Continuous
C-TOPO-DEMO Existing Contour Lines to be Changed
2, Yellow 2 Dashed
S.3.C1 Continued
____
Layer Description Color Linetype
____
C-STRM-CULV Culverts, Headwalls, Drainage Inlets 6, Magenta Continuous
C-STRM-IDEN Storm Sewer System Annotation 4, Cyan Continuous
C-STRM-DTCH Drainage Ditches 3, Green Dashed
P-STRM-FIXT Storm Drainage Surface Features 5, Blue Continuous
(Catch Basins, Manholes)
P-STRM-PIPE Storm Drain Pipes 5, Blue Dashed
C-SITE-WATR Site Water Features 2, Yellow Continuous
External Reference Files
Drawing File: AFLOR1.DWG
C-BLDG-PROP Footprint of Proposed Building 4,
Cyan Continuous
S.3.C2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Civil: Site Plan
Drawing File: CSITE1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
C-PSIT-TEXT General Notes and Specifications 3, Green Continuous
C-PSIT-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
C-PSIT-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
C-PSIT-TEXT General Notes and Specifications 3, Green Continuous
C-PSIT-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
C-PSIT-DIMS Dimensions 6, Magenta Continuous
Project Information Layers
C-ROAD Roads and Streets 5, Blue Continuous
C-ROAD-CURB Curb Lines 5, Blue Continuous
C-ROAD-GUTR Roadway Gutters 3, Green Continuous
C-ROAD-IDEN Road and Street Names 4, Cyan Continuous
C-ROAD-BRDG Roadway Bridges 6, Magenta Continuous
C-ROAD-STRP Roadway Striping 3, Green Hidden
L-WALK Pedestrian Walks 4, Cyan Continuous
L-WALK-BRDG Pedestrian Bridges 5, Blue Continuous
C-PKNG Parking Lot 4, Cyan Continuous
C-PKNG-STRP Parking Lot Striping 2, Yellow Continuous
L-SITE-WATR Site Water Features, 1, Red Continuous
L-SITE-FENC Fencing 3, Green Continuous
L-SITE-WALL Walls 3, Green Continuous
L-SITE-DECK Decks 6, Magenta Continuous
L-SITE-BRDG Pedestrian Bridges 4, Cyan Continuous
L-SITE-POOL Pools and Spas 6, Magenta Continuous
S.3.C2 continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: AFLOR1.DWG
C-BLDG-PROP Footprint of Proposed Building 4,
Cyan Continuous
Drawing File: CGRAD1.DWG
C-TOPO-ELEV Elevations 2, Yellow Continuous
C-TOPO-MAJR Major Contour Lines 4, Cyan Continuous
C-TOPO-MINR Minor Contour Lines 6, Magenta Continuous
C-GRID Grid Lines (California Coordinates) 3, Green Continuous
C-GRID-NOTE Grid Coordinates and Notes 3, Green
Continuous
C-BLDG-ELEV Building Elevations 2, Yellow Continuous
C-BLDG-IDEN Building Annotations 2, Yellow Continuous
C-PROP Property Line (Campus Boundary) 4, Cyan Phantom
C-PROP-NOTE Property Line Notes 5, Blue Continuous
C-PROP-ESMT Easements 6, Magenta Continuous
S.3.C3 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Civil: Site Utilities
Drawing File: CUTIL1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
C-PUTL-TEXT General Notes and Specifications 3, Green Continuous
C-PUTL-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
C-PUTL-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
C-PUTL-TEXT General Notes and Specifications 3, Green Continuous
C-PUTL-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
C-PUTL-DIMS Dimensions 6, Magenta Continuous
Project Information Layers
P-SSWR-MHOL Sanitary Sewer Manholes 4, Cyan Continuous
P-SSWR-ELEV Sanitary Sewer Elevations 4, Cyan Continuous
P-SSWR-PIPE Sanitary Sewer Pipe 3, Green Continuous
P-SSWR-IDEN Sanitary Sewer Annotation 3, Green Continuous
P-SSWR-EQPM Sanitary Sewer Equipment 6, Magenta Continuous
P-STRM-MHOL Sanitary Sewer Manholes 4, Cyan Continuous
P-STRM-ELEV Sanitary Sewer Elevations 4, Cyan Continuous
P-STRM-PIPE Sanitary Sewer Pipe 3, Green Continuous
P-STRM-IDEN Sanitary Sewer Annotation 3, Green Continuous
P-STRM-EQPM Sanitary Sewer Equipment 6, Magenta Continuous
P-GSWR-MHOL Grey Water Manholes 4, Cyan Continuous
P-GSWR-ELEV Grey Water Elevations 4, Cyan Continuous
P-GSWR-PIPE Grey Water Pipe 3, Green Continuous
P-GSWR-IDEN Grey Water Annotation 3, Green Continuous
P-GSWR-EQPM Grey Water Equipment 6, Magenta Continuous
P-DOMW Domestic Water System 3, Green Continuous
P-DOMW-MHOL Domestic Water Manholes 4, Cyan Continuous
P-DOMW-ELEV Domestic Water Elevations 4, Cyan Continuous
P-DOMW-PIPE Domestic Water Pipe 3, Green Continuous
P-DOMW-IDEN Domestic Water Annotation 3, Green Continuous
M-HOTW-MHOL Hot Water Manholes 4, Cyan Continuous
M-HOTW-ELEV Hot Water Elevations 4, Cyan Continuous
M-HOTW-RTRN Hot Water Return Lines
S.3.C3 continued
____
Layer Description Color Linetype
____
M-CWRT-MHOL Chilled Water Manholes 4, Cyan Continuous
M-CWRT-ELEV Chilled Water Elevations 4, Cyan Continuous
M-CWRT-IDEN Chilled Water Annotation 3, Green Continuous
M-NGAS-ELEV Natural Gas Elevations 3, Green Continuous
M-NGAS-PIPE Natural Gas Pipe 3, Green Continuous
M-NGAS-IDEN Natural Gas Annotation 3, Green Continuous
M-NGAS-MHOL Natural Gas Manholes 3, Green Continuous
Q-COMM-EQPM Communication Equipment 3, Green Continuous
Q-COMM-WIRE Wiring Cables, Duct Banks & Conduits 3, Green Continuous
Q-COMM-IDEN Communication System Annotation
External Reference Files
Drawing File: LSITE1.DWG
L-PLNT-TREE Tree 94, Grey Green Continuous (half tone)
L-PLNT-EXST Existing Plants to Remain 94, Grey
Green Continuous (half tone)
Drawing File: AFLOR1.DWG
C-BLDG-PROP Footprint of Proposed Building 4,
Cyan Continuous
Drawing File: CGRAD1.DWG
C-TOPO-MAJR Major Contour Lines 94, Grey Green 2 Dash (half tone)
C-TOPO-MINR Minor Contour Lines 174, Grey Yellow
2 Dash (half tone)
C-GRID Grid Lines (California Coordinates) 174, Grey Yellow Dashed (half tone)
C-GRID-NOTE Grid Coordinates and Notes 174, Grey
Yellow Continuous (half tone)
C-BLDG-IDEN Building Annotations 4, Cyan Continuous
C-PROP Property Line (Campus Boundary) 134, Grey Cyan Phantom (half tone)
C-PROP-ESMT Easements 214, Grey Magenta Continuous
(half tone)
S.3.C3 continued
____
Layer Description Color Linetype
____
Drawing File: CSITE1.DWG
C-ROAD Roads and Streets 214, Grey Magenta Continuous (half tone)
C-ROAD-CURB Curb Lines 94, Grey Green Continuous (half tone)
C-ROAD-IDEN Road and Street Names 94, Grey Green Continuous (half tone)
C-ROAD-BRDG Roadway Bridges 134, Grey Cyan Continuous
(half tone)
L-WALK Pedestrian Walks 94, Grey Green Continuous (half tone)
L-WALK-BRDG Pedestrian Bridges 214, Grey Magenta
Continuous (half tone)
C-PKNG Parking Lot 3, Green Continuous
L-SITE-FENC Fencing 94, Grey Green Continuous (half tone)
L-SITE-WALL Walls 94, Grey Green Continuous (half tone)
L-SITE-DECK Decks 214, Grey Magenta Continuous (half tone)
L-SITE-BRDG Pedestrian Bridges 134, Grey Cyan Continuous (half tone)
L-SITE-POOL Pools and Spas 214, Grey Magenta Continuous (half tone)
L-SITE-WATR Site Water Features, 14, Grey Red
Continuous (half tone)
S.3.L1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Landscape: Landscape Plan
Drawing File: LSITE1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
L-PPLA-TEXT Planting Plan General Notes and Specifications 3, Green Continuous
L-PPLA-SCHD Planting Plan Schedules and Tables of
Text 6, Magenta Continuous
Items Drawn in Model Space
Drawing Information Layers
L-PPLA-NOTE Planting Plan Notes, Call outs, and Key Notes 3, Green Continuous
L-PPLA-TEXT Planting Plan General Notes and Specifications 3, Green Continuous
L-PPLA-SYMB Planting Plan Symbols, Bubbles, and Targets 6, Magenta Continuous
L-PPLA-DIMS Planting Plan Dimensions 6, Magenta Continuous
Project Information Layers
L-PLNT-TREE Trees 3, Green Continuous
L-PLNT-EXST Existing Plants to Remain 3, Green Continuous
L-PLNT-DEMO Existing Plants to be Demolished 3, Green Continuous
L-PLNT-GRND Ground Cover and Vines 3, Green Continuous
L-PLNT-TURF Lawn Areas 3, Green Continuous
L-PLNT-BEDS Landscape Planting Beds 3, Green Continuous
External Reference Files
Drawing File: AFLOR1.DWG
C-BLDG-PROP Footprint of Proposed Building 134, Grey Cyan Continuous (half tone)
S.3.L1 continued
____
Layer Description Color Linetype
____
Drawing File: CGRAD1.DWG
C-TOPO-MAJR Major Contour Lines 94, Grey Green 2 Dash (half tone)
C-TOPO-MINR Minor Contour Lines 174, Grey Yellow
2 Dash (half tone)
C-GRID Grid Lines (California Coordinates) 174, Grey Yellow Dashed (half tone)
C-GRID-NOTE Grid Coordinates and Notes 174, Grey
Yellow Continuous (half tone)
C-BLDG-IDEN Building Annotations 4, Cyan Continuous
C-PROP Property Line (Campus Boundary) 134, Grey Cyan Phantom (half tone)
C-PROP-ESMT Easements 214, Grey Magenta Continuous
(half tone)
Drawing File: CSITE1.DWG
C-ROAD Roads and Streets 214, Grey Magenta Continuous (half tone)
C-ROAD-CURB Curb Lines 94, Grey Green Continuous (half tone)
C-ROAD-IDEN Road and Street Names 94, Grey Green Continuous (half tone)
C-ROAD-BRDG Roadway Bridges 134, Grey Cyan Continuous
(half tone)
L-WALK Pedestrian Walks 94, Grey Green Continuous (half tone)
L-WALK-BRDG Pedestrian Bridges 214, Grey Magenta
Continuous (half tone)
C-PKNG Parking Lot 94, Grey Green Continuous (half
tone)
L-SITE-FENC Fencing 94, Grey Green Continuous (half tone)
L-SITE-WALL Walls 94, Grey Green Continuous (half tone)
L-SITE-DECK Decks 214, Grey Magenta Continuous (half tone)
L-SITE-BRDG Pedestrian Bridges 134, Grey Cyan Continuous (half tone)
L-SITE-POOL Pools and Spas 214, Grey Magenta Continuous (half tone)
L-SITE-WATR Site Water Features, 14, Grey Red
Continuous (half tone)
S.3.L2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Landscape: Irrigation Plan
Drawing File: LIRIG1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
L-PIRR-TEXT General Notes and Specifications 3, Green Continuous
L-PIRR-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
L-PIRR-NOTE Notes, Call outs, and Key Notes 3, Green Continuous
L-PIRR-TEXT General Notes and Specifications 3, Green Continuous
L-PIRR-SYMB Symbols, Bubbles, and Targets 6, Magenta Continuous
L-PIRR-DIMS Dimensions 6, Magenta Continuous
Project Information Layers
L-IRRG-MAJR Main Irrigation Lines (larger than 2î) 3, Green Continuous
L-IRRG-SPHD Sprinkler Head 6, Magenta Continuous
L-IRRG-PIPE Sprinkler Piping 3, Green Continuous
L-IRRG-EQPM Irrigation Equipment 6, Magenta Continuous
L-IRRG-COVR Irrigation Coverage 3, Green Continuous
External Reference Files
Drawing File: LSITE1.DWG
L-PLNT-TREE Tree 3, Green Continuous
L-PLNT-EXST Existing Plants to Remain 3, Green Continuous
L-PLNT-GRND Ground Cover and Vines 3, Green Continuous
L-PLNT-TURF Lawn Areas 3, Green Continuous
L-PLNT-BEDS Landscape Planting Beds 3, Green Continuous
Drawing File: AFLOR1.DWG
C-BLDG-PROP Footprint of Proposed Building 4,
Cyan Continuous
S.3.L2 continued
____
Layer Description Color Linetype
____
Drawing File: CGRAD1.DWG
C-TOPO-MAJR Major Contour Lines 94, Grey Green 2 Dash (half tone)
C-TOPO-MINR Minor Contour Lines 174, Grey Yellow
2 Dash (half tone)
C-GRID Grid Lines (California Coordinates) 174, Grey Yellow Dashed (half tone)
C-GRID-NOTE Grid Coordinates and Notes 174, Grey
Yellow Continuous (half tone)
C-BLDG-IDEN Building Annotations 4, Cyan Continuous
C-PROP Property Line (Campus Boundary) 134, Grey Cyan Phantom (half tone)
C-PROP-ESMT Easements 214, Grey Magenta Continuous
(half tone)
Drawing File: CSITE1.DWG
C-ROAD Roads and Streets 214, Grey Magenta Continuous (half tone)
C-ROAD-CURB Curb Lines 94, Grey Green Continuous (half tone)
C-ROAD-IDEN Road and Street Names 94, Grey Green Continuous (half tone)
C-ROAD-BRDG Roadway Bridges 134, Grey Cyan Continuous
(half tone)
L-WALK Pedestrian Walks 94, Grey Green Continuous (half tone)
L-WALK-BRDG Pedestrian Bridges 214, Grey Magenta
Continuous (half tone)
C-PKNG Parking Lot 3, Green Continuous
L-SITE-FENC Fencing 94, Grey Green Continuous (half tone)
L-SITE-WALL Walls 94, Grey Green Continuous (half tone)
L-SITE-DECK Decks 214, Grey Magenta Continuous (half tone)
L-SITE-BRDG Pedestrian Bridges 134, Grey Cyan Continuous (half tone)
L-SITE-POOL Pools and Spas 214, Grey Magenta Continuous (half tone)
L-SITE-WATR Site Water Features, 14, Grey Red
Continuous (half tone)
S.3.A1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Floor Plan
Drawing File: AFLOR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PFLR-TEXT General Notes and Specifications 3, Green Continuous
A-PFLR-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PFLR-DIMS Floor Plan Dimensions 2, Yellow Continuous
A-PFLR-NOTE Floor Plan Notes, Call-Outs, 3, Green Continuous
A-PFLR-KEYN ConDoc Keynotes 3, Green Continuous
A-PFLR-SYMB Floor Plan Symbols, Bubbles and Targets
4, Cyan Continuous
Project Information Layers
A-WALL Walls 5, Blue Continuous
A-WALL-CNTR Wall Center Lines 2, Yellow Center
A-WALL-FULL Full Height Walls 6, Magenta Continuous
A-WALL-PRHT Partial Height Walls 4, Cyan Continuous
A-WALL-WHED Window Headers 3, Green Continuous
A-WALL-DHED Door Headers 3, Green Continuous
A-WALL-JAMB Door & Window Jambs 6, Magenta Continuous
A-WALL-PATT Wall Insulation, Hatch Patterns &
Fill 1, Red Continuous
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 4, Cyan Hidden
A-DOOR Doors 3, Green Continuous
A-DOOR-IDEN Door Number, Hardware Group, etc. 3,
Green Continuous
A-GLAZ Window, Window Walls, Curtain Walls
Curtain Walls, Glazed Partitions 5, Blue Continuous
A-GLAZ-SILL Window Sills 3, Green Continuous
A-GLAZ-IDEN Window Number 3, Green Continuous
A-FLOR Floor Information 3, Green Continuous
A-FLOR-CASE Architectural Casework 4, Cyan Continuous
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 5, Blue Continuous
A-FLOR-STRS Stairs, Escalators, and Ladders 4, Cyan Continuous
A-FLOR-HRAL Stair and Balcony Handrails and Guardrails 4, Cyan Continuous
A-FLOR-TPTN Toilet Portions 4, Cyan Continuous
A-FLOR-SPCL Architectural Specialties 4, Cyan Continuous
F-PROT-EQPM Fire System Equipment
(Fire Hose Cabinet, Extinguishers) 5, Blue Continuous
S.3.A1 continued
____
Layer Description Color Linetype
____
P-SANR-FTXT Toilets & Other Sanitary Fixture
3, Green Continuous
P-DOMW-FIXT Domestic Water Fixtures, Sinks, etc.
3, Green Continuous
C-BLDG-PROP Footprint of Proposed Building 0, White
Off, No Display
External Reference Files
Drawing File: COLGRID.DWG
S-COLS Structural Columns 6, Magenta Continuous
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S.3.A2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Reflected Ceiling Plan
Drawing File: ACLG1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PCLG-TEXT General Notes and Specifications 3, Green Continuous
A-PCLG-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PCLG-NOTE Ceiling Plan Notes, Call-Outs, 3, Green Continuous
A-PCLG-KEYN ConDoc Keynotes 3, Green Continuous
A-PCLG-SYMB Ceiling Plan Symbols, Bubbles and Targets 4, Cyan Continuous
A-PCLG-DIMS Ceiling Plan Dimensions 2, Yellow Continuous
Project Information Layers
Note:
This layering model locates ceiling fixtures of multiple
disciplines in the architectural reflected ceiling plan with the
understanding that the architect will be locating visible features
with the engineering disciplines providing the utilities support
for them. It would also be acceptable to locate fixtures in the
discipline specific drawings with the obvious condition that the
location be consistent (E-LITE-CLNG should appear in ACLG1.DWG
or ELITE.1DWG but not both) and the other disciplines drawings
then reference the appropriate file to create their backgrounds.
A-CLNG Ceiling Elements, soffits, and Bulkheads 3, Green Continuous
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 1, Red Continuous
A-CLNG-ACCS Access Panels & Ceiling Penetrations 3, Green Continuous
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 3, Green Continuous
M-CDFF-SUPP Ceiling Supply Diffusers 2, Yellow Continuous
M-CDFF-RETN Ceiling Return Diffusers 2, Yellow Continuous
E-LITE-CLNG Ceiling Mounted Lighting 3, Green Continuous
E-LITE-EXIT Exit Lighting 3, Green Continuous
E-LITE-EMER Emergency Lighting 3, Green Continuous
F-SPRN-SPHD Sprinkler Heads 5, Blue Continuous
F-AFFF-SPHD Aqueous Film Spray Heads 5, Blue Continuous
F-HALN-SPHD Halon Spray Heads 5, Blue Continuous
S.3.A2 Continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: AFLOR1.DWG
A-WALL-FULL Full Height Walls 6, Magenta Continuous
A-WALL-WHED Window Headers 3, Green Continuous
A-WALL-DHED Door Headers 3, Green Continuous
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 4, Cyan Continuous
Drawing File: COLGRID.DWG
S-COLS Structural Columns 6, Magenta Continuous
S-GRID Column Grid 3, Green Continuous
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S.3.A3 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Roof Plan
Drawing File: AROOF1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PROF-TEXT General Notes and Specifications 3, Green Continuous
A-PROF-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PROF-NOTE Roof Plan Notes, Call-Outs, 3, Green Continuous
A-PROF-KEYN ConDoc Keynotes 3, Green Continuous
A-PROF-SYMB Roof Plan Symbols, Bubbles and Targets 4, Cyan Continuous
A-PROF-DIMS Roof Plan Dimensions 2, Yellow Continuous
Project Information Layers
A-ROOF-LEVL Level Changes 4, Cyan Continuous
A-ROOF-OTLN Roof Perimeter/Edge Roof Geometry 6, Magenta Continuous
A-ROOF-STRS Stair Treads and Ladders 4, Cyan Continuous
A-ROOF-PATT Roof Cross Hatching & Patterns 1,
Red Continuous
External Reference Files
Drawing File: AFLOR1.DWG
C-BLDG-PROP Footprint of Proposed Building 1,
Red Hidden
Drawing File: COLGRID.DWG
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S.3.A4 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Enlarged Floor Plan e.g. Stair
Plan, Toilet Plans, etc.
The need for larger scale plan drawings is understood
and accommodated by these submittal standards. It is essential
however that the integrity of the project model or database not
be compromised by redundancies or absences in the comprehensive
project model.
These dual issues are accommodated via importing
appropriate segments of the full model as a reference file and
using the enlarged plan drawing only as a source of larger scale
symbology and notation and not actual project geometry, i.e. walls,
ducts, diffusers, etc.)
Drawing File: LGFLR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PLGS-TEXT General Notes and Specifications 3, Green Continuous
A-PLGS-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PLGS-NOTE Large Scale Floor Plan Notes, Call-Outs, 3, Green Continuous
A-PLGS-KEYN ConDoc Keynotes 3, Green Continuous
A-PLGS-SYMB Large Scale Floor Plan Symbols, ... 4, Cyan Continuous
A-PLGS-DIMS Large Scale Floor Plan Dimensions 2,
Yellow Continuous
Project Information Layers
External Reference Files
Drawing File: AFLOR1.DWG
A-WALL Walls 5, Blue Continuous
A-WALL-CNTR Wall Center Lines 2, Yellow Continuous
A-WALL-FULL Full Height Walls 6, Magenta Continuous
A-WALL-PRHT Partial Height Walls 4, Cyan Continuous
A-WALL-WHED Window Headers 3, Green Continuous
A-WALL-DHED Door Headers 3, Green Continuous
A-WALL-JAMB Door & Window Jambs 6, Magenta Continuous
A-WALL-PATT Wall Insulation, Hatch Patterns &
Fill 1, Red Continuous
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 4, Cyan Hidden
A-DOOR Doors 4, Cyan Continuous
S.3.A4 continued
____
Layer Description Color Linetype
____
A-GLAZ Window, Window Walls, Curtain Walls
Curtain Walls, Glazed Partitions 6, Magenta Continuous
A-GLAZ-SILL Window Sills 3, Green Continuous
A-FLOR Floor Information 3, Green Continuous
A-FLOR-CASE Architectural Casework 4, Cyan Continuous
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 5, Blue Continuous
A-FLOR-STRS Stairs, Escalators, and Ladders 4, Cyan Continuous
A-FLOR-HRAL Stair and Balcony Handrails and Guardrails 4, Cyan Continuous
A-FLOR-TPTN Toilet Portions 4, Cyan Continuous
A-FLOR-SPCL Architectural Specialties 4, Cyan
Continuous
P-SANR-FTXT Toilets & Other Sanitary Fixture
4, Cyan Continuous
P-DOMW-FIXT Domestic Water Fixtures, Sinks, etc.
4, Cyan Continuous
Drawing File: COLGRID.DWG
S-COLS Structural Columns 6, Magenta Continuous
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S.3.A5 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Equipment Plan
Drawing File: AEQUIP1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PEQP-TEXT General Notes and Specifications 3, Green Continuous
A-PEQP-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PEQP-NOTE Equipment Plan Notes, Call-Outs, 3, Green Continuous
A-PEQP-KEYN ConDoc Keynotes 3, Green Continuous
A-PEQP-SYMB Equipment Plan Symbols, Bubbles and Targets 6, Magenta Continuous
A-PEQP-DIMS Equipment Plan Dimensions 2, Yellow Continuous
Project Information Layers
Equipment
A-EQPM-FIXD Fixed Equipment (CSU Type 1) 3, Green Continuous
A-EQDM-MOVE Moveable Equipment (CSU Type 2) 3, Green Dashed
A-EQPM-IDEN Equipment Identification Numbers 3, Green
Continuous
External Reference Files
Drawing File: AFLOR1.DWG
Walls
A-WALL-FULL Full Height Walls 6, Magenta Continuous
A-WALL-PRHT Partial Height Walls 4, Cyan Continuous
A-WALL-WHED Window Headers 3, Green Continuous
A-WALL-DHED Door Headers 3, Green Continuous
A-WALL-JAMB Door & Window Jambs 6, Magenta
Continuous
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 4, Cyan Hidden
A-DOOR Doors 3, Green Continuous
A-GLAZ Window, Window Walls, Curtain Walls
Curtain Walls, Glazed Partitions 5, Blue Continuous
A-GLAZ-SILL Window Sills 3, Green Continuous
Floor Information
A-FLOR-CASE Architectural Casework 4, Cyan Continuous
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 5, Blue Continuous
A-FLOR-STRS Stairs, Escalators, and Ladders 4, Cyan Continuous
A-FLOR-TPTN Toilet Portions 4, Cyan Continuous
S.3.A5 Continued
____
Layer Description Color Linetype
____
Floor Information
A-FLOR-CASE Architectural Casework 4, Cyan Continuous
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 5, Blue Continuous
A-FLOR-STRS Stairs, Escalators, and Ladders 4, Cyan Continuous
A-FLOR-HRAL Stair and Balcony Handrails and Guardrails 4, Cyan Continuous
A-FLOR-TPTN Toilet Portions 5, Blue Continuous
A-FLOR-SPCL Architectural Specialties 4, Cyan
Continuous
Drawing File: COLGRID.DWG
S-COLS Structural Columns 4, Cyan Continuous
S-GRID Column Grid 2, Yellow Continuous
S-GRID-IDEN Column Grid Tags 3, Green Continuous
S.3.A6 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Elevations (Interior & Exterior)
Drawing File: AELEV1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-ELEV-TEXT General Notes and Specifications 3, Green Continuous
A-ELEV-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-ELEV-NOTE Elevation Notes, Call-Outs, 3, Green Continuous
A-ELEV-KEYN ConDoc Keynotes 3, Green Continuous
A-ELEV-SYMB Elevation Symbols, Bubbles and Targets 6, Magenta Continuous
A-ELEV-DIMS Elevation Dimensions 2, Yellow Continuous
Project Information Layers
A-ELEV-OTLN Building (or space) Outline 6, Magenta Continuous
A-ELEV-FNSH Extents of Finishes, Woodwork and Trim 4, Cyan Continuous
A-ELEV-PATT Elevation Cross-Hatching And Poche 1,
Red Continuous
Graphic layers may be further segregated by appropriate
layer modifiers if necessary, i.e.:
A-ELEV-WALL Walls Shown in Elevation View 2, Yellow Continuous
A-ELEV-COLL Columns Shown in Elevation View 2, Yellow
Continuous
Linework may also be segregated into appropriate
layer subgroups if necessary, i.e.:
A-ELEV-OTLN-LW50 Medium Linework 4, Cyan Continuous
A-ELEV-OTLN-LW75 Heavy Linework 4, Cyan Continuous
A-ELEV-FNSH-LW25 Light Linework 6, Magenta Continuous
A-ELEV-FNSH-LW35 Fine Linework 6, Magenta Continuous
S.3.A7 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Sections
Drawing File: ASECT1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-SECT-TEXT General Notes and Specifications 3, Green Continuous
A-SECT-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-SECT-NOTE Section Notes, Call-Outs, 3, Green Continuous
A-SECT-KEYN ConDoc Keynotes 3, Green Continuous
A-SECT-SYMB Section Symbols, Bubbles and Targets 6, Magenta Continuous
A-SECT-DIMS Section Dimensions 2, Yellow Continuous
Project Information Layers
A-SECT-MCUT Materials Cut by Section 6, Magenta Continuous
A-SECT-MBNT Materials Beyond Section Cut 4, Cyan Continuous
A-SECT-OTLN Building (or space) Outline 5, Blue Continuous
A-SECT-FNSH Extents of Finishes, Woodwork and Trim 4, Cyan Continuous
A-SECT-PATT Elevation Cross-Hatching And Poche 1,
Red Continuous
Graphic layers may be further segregated by appropriate
layer modifiers if necessary, i.e.:
A-SECT-WALL Walls Shown in Elevation View 2, Yellow Continuous
A-SECT-COLL Columns Shown in Elevation View 2, Yellow
Continuous
Linework may also be segregated into appropriate
layer subgroups if necessary, i.e.:
A-SECT-MCUT-LW50 Medium Linework 4, Cyan Continuous
A-SECT-MCUT-LW75 Heavy Linework 4, Cyan Continuous
A-SECT-MBNT-LW25 Light Linework 6, Magenta Continuous
A-SECT-MBNT-LW35 Fine Linework 6, Magenta Continuous
S.3.A8 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Details
Drawing File: ADETL1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-DETL-TEXT General Notes and Specifications 3, Green Continuous
A-DETL-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-DETL-NOTE Detail Notes, Call-Outs, 3, Green Continuous
A-DETL-KEYN ConDoc Keynotes 3, Green Continuous
A-DETL-SYMB Detail Symbols, Bubbles and Targets 6, Magenta Continuous
A-DETL-DIMS Detail Dimensions 2, Yellow Continuous
Project Information Layers
A-DETL-MCVT Materials Cut by Section 4, Cyan Continuous
A-DETL-MBNT Materials Beyond Section Cut 4, Cyan Continuous
A-DETL-PATT Detail Cross-Hatching And Poche 1, Red
Continuous
Graphic layers may be further segregated by appropriate
layer modifiers if necessary, i.e.:
A-DETL-WALL Walls Shown in Elevation View 2, Yellow Continuous
A-DETL-DOOR Doors Shown in Elevation View 2, Yellow
Continuous
Linework may also be segregated into appropriate
layer subgroups if necessary, i.e.:
A-DETL-MCVT-LW50 Medium Linework 4, Cyan Continuous
A-DETL-MCVT-LW75 Heavy Linework 4, Cyan Continuous
A-DETL-MBNT-LW25 Light Linework 6, Magenta Continuous
A-DETL-MBNT-LW35 Fine Linework 6, Magenta Continuous
S.3.A9 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Demolition Plan
Drawing File: ADEMO1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PDEM-TEXT General Notes and Specifications 3, Green Continuous
A-PDEM-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PDEM-NOTE Demolition Notes, Call-Outs, 3, Green Continuous
A-PDEM-KEYN ConDoc Keynotes 3, Green Continuous
A-PDEM-SYMB Demolition Symbols, Bubbles and Targets 6, Magenta Continuous
A-PDEM-DIMS Demolition Dimensions 2, Yellow Continuous
Project Information Layers
A-WALL-EXST Existing Wall to Remain 3, Green Continuous
A-WALL-DEMO Existing Wall to be Removed 3, Green Dashed
A-WALL-DEMO-HAZW Wall to be Removed Contains Hazardous
Mtl.s 1, Red Continuous
Other features as required to document scope of existing
work to be retained and demolished. Work shown in layers not noted
as existing (EXST) or demolished (DEMO) is assumed to be new construction.
S.3.A10 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Architectural: Occupancy Plan
Drawing File: AREA1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
A-PARE-TEXT General Notes and Specifications 3, Green Continuous
A-PARE-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
A-PARE-NOTE Area Plan Notes, Call-Outs, 3, Green Continuous
A-PARE-KEYN ConDoc Keynotes 3, Green Continuous
A-PARE-SYMB Area Plan Symbols, Bubbles and Targets 6, Magenta Continuous
A-PARE-DIMS Area Plan Dimensions 2, Yellow Continuous
Project Information Layers
A-AREA-ROOM Room/Space Boundary 6, Magenta Dashed
A-AREA-OCCP Occupancy Zone Boundary Lines 4, Cyan Continuous
A-AREA-PATT Cross-Hatching And Poche 1, Red Continuous
A-AREA-IDEN Room Numbers & Space ID tags 2,
Yellow Continuous
If area plans are shown against a half tone floor
plan the appropriate reference files would be attached as below.,
External Reference Files
Drawing File: AFLOR1.DWG
Walls
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous (half tone)
A-WALL-PRHT Partial Height Walls 134, Grey Cyan Continuous (half tone)
A-WALL-JAMB Door & Window Jambs 214, Grey
Magenta Continuous (half tone)
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 174, Grey Yellow Hidden(half tone)
A-DOOR Doors 94, Grey Green Continuous (half tone)
A-GLAZ Window, Window Walls, Curtain Walls 174, Grey Blue Continuous (half tone)
A-GLAZ-SILL Window Sills 94, Grey Green Continuous
(half tone)
S.3.A10 Continued
____
Layer Description Color Linetype
____
Floor Information
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 174, Grey Blue Continuous (half tone)
A-FLOR-STRS Stairs, Escalators, and Ladders 134, Grey Cyan Continuous (half tone)
A-FLOR-TPTN Toilet Portions 134, Grey Cyan Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous (half tone)
S.3.S1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Structural: Foundation Plans
Drawing File: FNDN1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
S-PFND-TEXT General Notes and Specifications 3, Green Continuous
S-PFND-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
S-PFND-DIMS Foundation Plan Dimensions 2, Yellow Continuous
S-PFND-KEYN ConDoc Keynotes 3, Green Continuous
S-PFND-NOTE Foundation Plan Notes, Call-Outs, 3, Green Continuous
S-PFND-SYMB Foundation Plan Symbols, Bubbles and
Targets 4, Cyan Continuous
Project Information Layers
S-ABLT Anchor Bolts & Hold-Downs 4, Cyan Continuous
S-FNDN-FTNG Footings 6, Magenta Continuous
S-FNDN-GRBM Grade Beams 6, Magenta Continuous
S-FNDN-PIER Piers 6, Magenta Continuous
S-FNDN-RBAR Reinforcing Bars 5, Blue Continuous
S-FNDN-WELD-SYMD Welding Symbols 3, Green Continuous
S-JNTS-CNST Construction Joints 4, Cyan Continuous
S-JNTS-CTRL Control Joints 4, Cyan Continuous
S-SLAB-OTLN Slab Outline 6, Magenta Continuous
S-SLAB-RBAR Concrete Slab Reinforcing 5, Blue Continuous
External Reference Files
Drawing File: COLGRID.DWG
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S.3.S2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Structural: Framing Plans
Drawing File: SFRAM1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
S-PSFR-TEXT General Notes and Specifications 3, Green Continuous
S-PSFR-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
S-PSFR-DIMS Foundation Plan Dimensions 2, Yellow Continuous
S-PSFR-NOTE Foundation Plan Notes, Call-Outs, 3, Green Continuous
S-PSFR-KEYN ConDoc Keynotes 3, Green Continuous
S-PSFR-SYMB Foundation Plan Symbols, Bubbles and
Targets 4, Cyan Continuous
Project Information Layers
S-FRAM-BEAM Beams 5, Blue Continuous
The drawing may be further segregated with sublayers if needed, e.g.:
S-FRAM-BEAM-PRIM Primary Beams 6, Magenta Continuous
S-FRAM-BEAM-SCND Secondary Beams 4, Cyan Continuous
S-FRAM-DECK Structural Decking 4, Cyan Continuous
S-FRAM-JOIS Joists 6, Magenta Continuous
S-FRAM-RBAR Reinforcing Bars 5, Blue Continuous
S-FRAM-WELD-SYMD Welding Symbols 3, Green Continuous
External Reference Files
Drawing File: COLGRID.DWG
S-GRID Column Grid 2, Yellow Continuous
S-GRID-IDEN Column Grid Tags 3, Green Continuous
S-COLS Structural Columns 4, Cyan Continuous
S.3.S3 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Structural: Column Plans
Drawing File: COLGRID.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
S-PCOL-TEXT General Notes and Specifications 3, Green Continuous
S-PCOL-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
S-PCOL-DIMS Foundation Plan Dimensions 2, Yellow Continuous
S-PCOL-KEYN ConDoc Keynotes 3, Green Continuous
S-PCOL-NOTE Foundation Plan Notes, Call-Outs, 3, Green Continuous
S-PCOL-SYMB Foundation Plan Symbols, Bubbles and
Targets 4, Cyan Continuous
Project Information Layers
S-GRID Column Grid 2, Yellow Center
S-GRID-IDEN Column Grid Tags 4, Cyan Continuous
S-COLS Structural Columns 6, Magenta Continuous
S-COLS-RBAR Reinforcing Bars 5, Blue Continuous
S-COLS-WELD-SYMD Welding Symbols 3, Green Continuous
S.3.S4 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Structural: Elevations
Drawing File: SELEV1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
S-ELEV-TEXT General Notes and Specifications 3, Green Continuous
S-ELEV-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
S-ELEV-DIMS Elevation Dimensions 2, Yellow Continuous
S-ELEV-NOTE Elevation Notes, Call-Outs, 3, Green Continuous
S-ELEV-KEYN ConDoc Keynotes 3, Green Continuous
S-ELEV-SYMB Elevation Symbols, Bubbles and Targets
4, Cyan Continuous
Project Information Layers
S-GRID Vertical Column Grid Lines 2, Yellow Center
S-GRID-TAGS Column Tags 4, Cyan Continuous
S-ELEV-BEAM Beams Shown in Elevation View 4, Cyan Continuous
S-ELEV-FTNG Footings Shown in Elevation View 3, Green Continuous
S-ELEV-WALL Structural Walls Shown in Elevation View 3, Green Continuous
S-ELEV-COLL Structural Columns Shown in Elevation
View 4, Cyan Continuous
S-ELEV-RBAR Reinforcing Bars 5, Blue Continuous
S-ELEV-WELD-SYMB Welding Symbols 3, Green Continuous
S-ELEV-PATT Elevation Cross-Hatching And Poche 1,
Red Continuous
Linework may also be segregated into appropriate
layer subgroups if necessary, i.e.:
S-ELEV-BEAM-LW50 Medium Linework 4, Cyan Continuous
S-ELEV-BEAM-LW75 Heavy Linework 4, Cyan Continuous
S.3.S5 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Structural: Details
Drawing File: SDETL1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
S-DETL-TEXT General Notes and Specifications 3, Green Continuous
S-DETL-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
S-DETL-NOTE Detail Notes, Call-Outs, 3, Green Continuous
S-DETL-KEYN ConDoc Keynotes 3, Green Continuous
S-DETL-SYMB Detail Symbols, Bubbles and Targets 6, Magenta Continuous
S-DETL-DIMS Detail Dimensions 2, Yellow Continuous
Project Information Layers
S-DETL-MCUT Materials Cut by Section 4, Cyan Continuous
S-DETL-MBNT Materials Beyond Section Cut 4, Cyan Continuous
S-DETL-PATT Detail Cross-Hatching And Poche 1, Red
Continuous
S-GRID Column Grid Lines 2, Yellow Continuous
S-GRID-TAGS Column Tags 3, Green Continuous
Graphic layers may be further segregated by appropriate
layer modifiers if necessary, i.e.:
S-DETL-BEAM Beams Shown in Detail View 4, Cyan Continuous
S-DETL-COLL Columns Shown in Detail View 4, Cyan Continuous
S-DETL-RBAR Concrete Reinforcing Bars 5, Blue Continuous
Linework may also be segregated into appropriate
layer subgroups if necessary, i.e.:
S-DETL-MCVT-LW50 Medium Linework 4, Cyan Continuous
S-DETL-MCVT-LW70 Heavy Linework 5, Blue Continuous
S-DETL-MBNT-LW25 Light Linework 1, Red Continuous
S-DETL-MBNT-LW35 Fine Linework 2, Yellow Continuous
S.3.M1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Mechanical: HVAC Plan
Drawing File: MHVAC1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
M-PHVA-TEXT General Notes and Specifications 3, Green Continuous
M-PHVA-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
M-PHVA-DIMS HVAV Plan Dimensions 2, Yellow Continuous
M-PHVA-NOTE HVAV Plan Notes, Call-Outs, 3, Green Continuous
M-PHVA-KEYN ConDoc Keynotes 3, Green Continuous
M-PHVA-SYMB HVAV Plan Symbols, Bubbles and Targets
4, Cyan Continuous
Project Information Layers
M-DUCT-SUPP Supply Ductwork 4,Cyan Continuous
M-DUCT-RETN Return Ductwork 4,Cyan Continuous
M-DUCT-EXHT Exhaust Ductwork 4,Cyan Continuous
M-DUCT-OTHR Other Ductwork 4,Cyan Continuous
M-HVAC-EQUP HVAC Equipment 5, Blue Continuous
M-VENT-DUCT Industrial or Laboratory Venting 4,Cyan Continuous
M-VENT-EQPM Industrial or Laboratory Venting Equipment
4,Cyan Continuous
External Reference Files
Drawing File: ACLG1.DWG
M-CDFF-SUPP Ceiling Supply Diffusers 5, Blue Continuous
M-CDFF-RETN Ceiling Return Diffusers 5, Blue Continuous
A-CLNG Ceiling Elements, soffits, and Bulkheads 94, Grey Green Continuous (half tone)
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 14, Grey Red Continuous (half tone)
A-CLNG-ACCS Access Panels & Ceiling Penetrations 94, Grey Green Continuous (half tone)
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 94, Grey Green Continuous (half tone)
E-LITE-CLNG Ceiling Mounted Lighting 134, Grey Cyan Continuous (half tone)
E-LITE-EXIT Exit Lighting 94, Grey Green Continuous (half tone)
E-LITE-EMER Emergency Lighting 94, Grey Green
Continuous (half tone)
S.3.M1 Continued
____
Layer Description Color Linetype
____
Drawing File: AFLOR1.DWG
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL Walls 174, Grey Blue Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous (half tone)
S.3.M2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Mechanical: Piping Plan
Drawing File: MPIPE1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
M-PPIP-TEXT General Notes and Specifications 3, Green Continuous
M-PPIP-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
M-PPIP-NOTE Piping Plan Notes, Call-Outs, 3, Green Continuous
M-PPIP-KEYN ConDoc Keynotes 3, Green Continuous
M-PPIP-SYMB Piping Plan Symbols, Bubbles and Targets 6, Magenta Continuous
M-PPIP-DIMS Piping Plan Dimensions 2, Yellow Continuous
Project Information Layers
M-CWTR-PIPE Chilled Water Pipe 4,Cyan Continuous
M-CWTR-EQPM Chilled Water Equipment 5, Blue Continuous
M-HOTW-PIPE Hot Water Heating Pipe 4,Cyan Continuous
M-HOTW-EQPM Hot Water Heating Equipment 5, Blue Continuous
M-DUAL-PIPE Dual Temperature System Pipe 4,Cyan Continuous
M-DUAL-EQPM Dual Temperature System Equipment 5,
Blue Continuous
M-REFG-EQPM Refrigeration System Equipment 5, Blue Continuous
M-REFG-PIPE Refrigeration System Piping 4,Cyan Continuous
M-STEM-LPIP Low Pressure Steam Piping 4,Cyan Continuous
M-STEM-MPIP Medium Pressure Steam Piping 4,Cyan Continuous
M-STEM-HPIP High Pressure Steam Piping 4,Cyan Continuous
M-STEM-EQPM Refrigeration System Equipment 5, Blue Continuous
S.3.M2 Continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: MHVAC1.DWG
M-HVAC-EQUP HVAC Equipment 3, Green Continuous
Drawing File: AFLOR1.DWG
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL Walls 174, Grey Blue Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous
(half tone)
Drawing File: ACLG1.DWG
M-CDFF-SUPP Ceiling Supply Diffusers 5, Blue Continuous
M-CDFF-RETN Ceiling Return Diffusers 5, Blue Continuous
A-CLNG Ceiling Elements, soffits, and Bulkheads 94, Grey Green Continuous (half tone)
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 94, Grey Green Continuous (half tone)
A-CLNG-ACCS Access Panels & Ceiling Penetrations 94, Grey Green Continuous (half tone)
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 94, Grey Green Continuous (half tone)
E-LITE-CLNG Ceiling Mounted Lighting 134, Grey Cyan Continuous (half tone)
E-LITE-EXIT Exit Lighting 94, Grey Green Continuous (half tone)
E-LITE-EMER Emergency Lighting 94, Grey Green
Continuous (half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous (half tone)
S.3.M3 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Mechanical: Roof Plan
Drawing File: MROOF1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
M-PROF-TEXT General Notes and Specifications 3, Green Continuous
M-PROF-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
M-PROF-DIMS Mechanical Roof Plan Dimensions 2, Yellow Continuous
M-PROF-NOTE Mechanical Roof Plan Notes, Call-Outs, 3, Green Continuous
M-PROF-KEYN ConDoc Keynotes 3, Green Continuous
M-PROF-SYMB Mechanical Roof Plan Symbols 4,Cyan Continuous
Project Information Layers
M-CWTR-PIPE Chilled Water Pipe 4,Cyan Continuous
M-CWTR-EQPM Chilled Water Equipment 5, Blue Continuous
M-HOTW-PIPE Hot Water Heating Pipe 4,Cyan Continuous
M-HOTW-EQPM Hot Water Heating Equipment 5, Blue Continuous
M-REFG-PIPE Refrigeration System Piping 4,Cyan Continuous
M-REFG-EQPM Refrigeration System Equipment 5, Blue
Continuous
M-DUCT-SUPP Supply Ductwork 4,Cyan Continuous
M-DUCT-RETN Return Ductwork 4,Cyan Continuous
M-DUCT-EXHT Exhaust Ductwork 4,Cyan Continuous
M-DUCT-OTHR Other Ductwork 4,Cyan Continuous
M-HVAC-EQUP HVAC Equipment 3, Green Continuous
M-VENT-DUCT Industrial or Laboratory Venting 4,Cyan Continuous
M-VENT-EQPM Industrial or Laboratory Venting Equipment
5, Blue Continuous
S.3.M3 Continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: AROOF1.DWG
A-ROOF-LEVL Level Changes 134, Grey Cyan Continuous (half tone)
A-ROOF-OTLN Roof Perimeter/Edge Roof Geometry 214, Grey Magenta Continuous (half tone)
A-ROOF-STRS Stair Treads and Ladders 134, Grey
Cyan Continuous (half tone)
Drawing File: COLGRID.DWG
S-GRID Column Grid 54, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous
(half tone)
S.3.M4 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Mechanical: Controls Plan
Drawing File: MCNTRL1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
M-PCON-TEXT General Notes and Specifications 3, Green Continuous
M-PCON-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
M-PCON-NOTE Mechanical Controls Plan Notes, Call-Outs, 3, Green Continuous
M-PCON-KEYN ConDoc Keynotes 3, Green Continuous
M-PCON-SYMB Mechanical Controls Plan Symbols, 6, Magenta Continuous
M-PCON-DIMS Mechanical Controls Plan Dimensions 2,
Yellow Continuous
Project Information Layers
M-CONT-WIRE Mechanical Controls Wiring 4,Cyan Continuous
M-CONT-INST Mechanical Controls Instrumentation 5,
Blue Continuous
M-ENER-SYST Energy Management Systems 4,Cyan Continuous
External Reference Files
External Reference Files
Drawing File: MHVAC1.DWG
M-HVAC-EQUP HVAC Equipment 3, Green Continuous
Drawing File: AFLOR1.DWG
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL Walls 174, Grey Blue Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous (half tone)
S.3.M4 Continued
____
Layer Description Color Linetype
____
Drawing File: ACLG1.DWG
M-CDFF-SUPP Ceiling Supply Diffusers 5, Blue Continuous
M-CDFF-RETN Ceiling Return Diffusers 5, Blue Continuous
A-CLNG Ceiling Elements, soffits, and Bulkheads 94, Grey Green Continuous (half tone)
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 94, Grey Green Continuous (half tone)
A-CLNG-ACCS Access Panels & Ceiling Penetrations 94, Grey Green Continuous (half tone)
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 94, Grey Green Continuous (half tone)
E-LITE-CLNG Ceiling Mounted Lighting 134, Grey Cyan Continuous (half tone)
E-LITE-EXIT Exit Lighting 94, Grey Green Continuous (half tone)
E-LITE-EMER Emergency Lighting 94, Grey Green
Continuous (half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous (half tone)
S.3.M5 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Mechanical: Enlarged Plan
The need for larger scale plan drawings is understood
and accommodated by these submittal standards. It is essential
however that the integrity of the project model or database not
be compromised by redundancies or absences in the comprehensive
project model.
These dual issues are accommodated via importing
appropriate segments of the full model as a reference file and
using the enlarged plan drawing only as a source of larger scale
symbology and notation and not actual project geometry, i.e. walls,
ducts, diffusers, etc.)
Drawing File: LGMCH1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
M-PLGS--TEXT General Notes and Specifications 3, Green Continuous
M-PLGS--SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
M-PLGS-NOTE Large Scale HVAC Plan Notes, Call-Outs, 3, Green Continuous
M-PLGS--KEYN ConDoc Keynotes 3, Green Continuous
M-PLGS--SYMB Large Scale HVAC Plan Symbols, ... 6, Magenta Continuous
M-PLGS--DIMS Large Scale HVAC Plan Dimensions 2,
Yellow Continuous
Project Information Layers
External Reference Files
Drawing File: MPIPE1.DWG
M-CWTR-PIPE Chilled Water Pipe 4,Cyan Continuous
M-CWTR-EQPM Chilled Water Equipment 5, Blue Continuous
M-HOTW-PIPE Hot Water Heating Pipe 4,Cyan Continuous
M-HOTW-EQPM Hot Water Heating Equipment 5, Blue
Continuous
M-DUAL-PIPE Dual Temperature System Pipe 4,Cyan Continuous
M-DUAL-EQPM Dual Temperature System Equipment
5, Blue Continuous
M-REFG-EQPM Refrigeration System Equipment 5, Blue Continuous
M-REFG-PIPE Refrigeration System Piping 4,Cyan
Continuous
M-STEM-LPIP Low Pressure Steam Piping 4,Cyan Continuous
M-STEM-MPIP Medium Pressure Steam Piping 4,Cyan Continuous
M-STEM-HPIP High Pressure Steam Piping 4,Cyan Continuous
M-STEM-EQPM Refrigeration System Equipment 5,
Blue Continuous
S.3.M5 Continued
____
Layer Description Color Linetype
____
Drawing File: MHVAC1.DWG
M-DUCT-SUPP Supply Ductwork 4,Cyan Continuous
M-DUCT-RETN Return Ductwork 4,Cyan Continuous
M-DUCT-EXHT Exhaust Ductwork 4,Cyan Continuous
M-DUCT-OTHR Other Ductwork 4,Cyan Continuous
M-HVAC-EQUP HVAC Equipment 3, Green Continuous
M-VENT-DUCT Industrial or Laboratory Venting 4,Cyan Continuous
M-VENT-EQPM Industrial or Laboratory Venting Equipment
4,Cyan Continuous
Drawing File: AFLOR1.DWG
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL Walls 174, Grey Blue Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous
(half tone)
Drawing File: ACLG1.DWG
M-CDFF-SUPP Ceiling Supply Diffusers 5, Blue Continuous
M-CDFF-RETN Ceiling Return Diffusers 5, Blue Continuous
A-CLNG Ceiling Elements, soffits, and Bulkheads 94, Grey Green Continuous (half tone)
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 94, Grey Green Continuous (half tone)
A-CLNG-ACCS Access Panels & Ceiling Penetrations 94, Grey Green Continuous (half tone)
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 94, Grey Green Continuous (half tone)
E-LITE-CLNG Ceiling Mounted Lighting 134, Grey Cyan Continuous (half tone)
E-LITE-EXIT Exit Lighting 94, Grey Green Continuous (half tone)
E-LITE-EMER Emergency Lighting 94, Grey Green
Continuous (half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous
(half tone)
S.3.P1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Plumbing: Plumbing Plan
Drawing File:PLUMB1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
P-PPLM-TEXT General Notes and Specifications 3, Green Continuous
P-PPLM-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
P-PPLM-NOTE Plumbing Plan Notes, Call-Outs, 3, Green Continuous
P-PPLM-KEYN ConDoc Keynotes 3, Green Continuous
P-PPLM-SYMB Plumbing Plan Symbols, Bubbles and Targets 4, Cyan Continuous
P-PPLM-DIMS Plumbing Plan Dimensions 2, Yellow Continuous
Project Information Layers
P-ACID-PIPE Acid, Alkaline, and Oil Waste System Piping 4, Cyan Continuous
P-ACID-EQPM Acid, Alkaline, and Oil Waste System
Equipment 5, Blue Continuous
P-DOMW-EQPM Domestic Hot and Cold Water Equipment 5, Blue Continuous
P-DOMW-PIPE Domestic Hot and Cold Water Piping 4,
Cyan Continuous
P-SANR-PIPE Sanitary Piping 4, Cyan Continuous
P-SANR-VENT Sanitary Vent Piping 4, Cyan Continuous
P-SANR-EQPM Sanitary Equipment 5, Blue Continuous
P-STRM-PIPE Storm Drain Piping 4, Cyan Continuous
P-STRM-RFDR Roof Drains 5, Blue Continuous
P-NGAS-PIPE Natural Gas System Piping 4, Cyan Continuous
P-NGAS-EQPM Natural Gas System Equipment 5, Blue
Continuous
P-LABS-PIPE Laboratory Gas Piping 4, Cyan Continuous
P-LABS-EQPM Laboratory Equipment 5, Blue Continuous
S.3.P1 Continued
Layer Description Color Linetype
External Reference Files
Drawing File: AFLOR1.DWG
P-SANR-FTXT Sanitary Fixture, Toilets Etc. 3,
Green Continuous
P-DOMW-FIXT Domestic Water Fixtures, Sinks, etc.
3, Green Continuous
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-PRTL Partial Height Walls 174, Grey Blue Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous (half tone)
A-WALL-JAMB Door & Window Jambs 214, Grey
Magenta Continuous (half tone)
A-DOOR Doors 94, Grey Green Continuous (half tone)
A-GLAZ Window, Window Walls, Curtain Walls 214, Grey Magenta Continuous (half tone)
A-GLAZ-SILL Window Sills 94, Grey Green Continuous
(half tone)
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 94, Grey Green Continuous (half tone)
A-FLOR-STRS Stairs, Escalators, and Ladders 94, Grey Green Continuous (half tone)
A-FLOR-TPTN Toilet Portions 94, Grey Green Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 134, Grey Cyan Continuous (half tone)
S-GRID Column Grid 54, Grey Yellow Continuous (half tone)
S-GRID-IDEN Column Grid Tags 94, Grey Green Continuous
(half tone)
S.3.P2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Plumbing: Riser Diagrams
Drawing File: PRISR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
P-RISR-TEXT General Notes and Specifications 3, Green Continuous
P-RISR-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
P-RISR-NOTE Plumbing Riser Diagrams Notes, Call-Outs, 3, Green Continuous
P-RISR-KEYN ConDoc Keynotes 3, Green Continuous
P-RISR-SYMB Plumbing Riser Diagrams Symbols 6, Magenta Continuous
P-RISR-DIMS Plumbing Riser Diagrams Dimensions 2,
Yellow Continuous
Project Information Layers
P-ACID-PIPE Acid, Alkaline, and Oil Waste System
3, Green Continuous
P-DOMW-PIPE Domestic Hot and Cold Water Piping 4, Cyan Continuous
P-DOMW-EQPM Domestic Hot and Cold Water Equipment
5, Blue Continuous
P-SANR-PIPE Sanitary Piping 4, Cyan Continuous
P-SANR-VENT Sanitary Vent Piping 4, Cyan Continuous
P-SANR-EQPM Sanitary Equipment 5, Blue Continuous
P-STRM-PIPE Storm Drain Piping 4, Cyan Continuous
P-STRM-RFDR Roof Drains 5, Blue Continuous
P-NGAS-PIPE Natural Gas System Piping 4, Cyan Continuous
P-NGAS-EQPM Natural Gas System Equipment 5, Blue
Continuous
P-LABS-PIPE Laboratory Gas Piping 4, Cyan Continuous
P-LABS-EQPM Laboratory Equipment 5, Blue Continuous
S.3.F1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Fire Suppression: Fire Suppression Plan
Drawing File: FSUPR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
F-PSPR-TEXT General Notes and Specifications 3, Green Continuous
F-PSPR-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
F-PSPR-NOTE Ceiling Plan Notes, Call-Outs, 3, Green Continuous
F-PSPR-KEYN ConDoc Keynotes 3, Green Continuous
F-PSPR-SYMB Ceiling Plan Symbols, Bubbles and Targets 6, Magenta Continuous
F-PSPR-DIMS Ceiling Plan Dimensions 2, Yellow Continuous
Project Information Layers
Aqueous Film System
F-AFFF-PIPE Aqueous Film System Piping 4, Cyan Continuous
F-AFFF-EQPM Aqueous Film Equipment 5, Blue Continuous
Halon System
F-HALN-PIPE Halon System Piping 4, Cyan Continuous
F-HALN-EQPM Halon Equipment 5, Blue Continuous
Fire Protection Sprinkler System
F-SPRN-PIPE Sprinkler Piping 4, Cyan Continuous
Fire Protection Standpipe System
F-STAN-EQIP Fire Protection Standpipe Equipment 5, Blue Continuous
F-STAN-PIPE Fire Protection Standpipe Piping 4, Cyan
Continuous
Fire Protection Systems
F-PROT-ALRM Fire Alarm 5, Blue Continuous
F-PROT-SMOK Smoke Detectors or Heat Sensors 5, Blue
Continuous
CO2 (Carbon Dioxide) System
F-CO2S-PIPE CO2 (Carbon Dioxide) System Piping 4, Cyan Continuous
F-CO2S-EQPM CO2 (Carbon Dioxide) System Equipment 5, Blue Continuous
S.3.F1 Fire Suppression Plan Continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: ACLG1.DWG
M-CDFF-SUPP Ceiling Supply Diffusers 5, Blue Continuous
M-CDFF-RETN Ceiling Return Diffusers 5, Blue Continuous
F-HALN-SPHD Halon Spray Heads 5, Blue Continuous
F-SPRN-SPHD Sprinkler Heads 5, Blue Continuous
F-AFFF-SPHD Aqueous Film Spray Heads 5, Blue Continuous
A-CLNG Ceiling Elements, soffits, and Bulkheads 94, Grey Green Continuous (half tone)
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 14, Grey Red Continuous (half tone)
A-CLNG-ACCS Access Panels & Ceiling Penetrations 94, Grey Green Continuous (half tone)
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 94, Grey Green Continuous (half tone)
E-LITE-CLNG Ceiling Mounted Lighting 134, Grey Cyan Continuous (half tone)
E-LITE-EXIT Exit Lighting 94, Grey Green Continuous (half tone)
E-LITE-EMER Emergency Lighting 94, Grey Green
Continuous (half tone)
Drawing File: AFLOR1.DWG
F-PROT-EQPM Fire System Equipment
(Fire Hose Cabinet, Extinguishers) 5, Blue Continuous
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL Walls 174, Grey Blue Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous
(half tone)
S.3.F2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Fire Suppression: Riser Diagrams
Drawing File: FRISR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
F-RISR-TEXT General Notes and Specifications 3, Green Continuous
F-RISR-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
F-RISR-NOTE Plumbing Riser Diagrams Notes, Call-Outs, 3, Green Continuous
F-RISR-KEYN ConDoc Keynotes 3, Green Continuous
F-RISR-SYMB Plumbing Riser Diagrams Symbols 4, Cyan Continuous
F-RISR-DIMS Plumbing Riser Diagrams Dimensions 2,
Yellow Continuous
Project Information Layers
F-HALN-PIPE Aqueous Film System Piping 4, Cyan Continuous
F-HALN-EQPM Aqueous Film Equipment 5, Blue Continuous
F-HALN-PIPE Halon System Piping 4, Cyan Continuous
F-HALN-EQPM Halon Equipment 5, Blue Continuous
F-SPRN-PIPE Sprinkler Piping 4, Cyan Continuous
F-STAN-PIPE Fire Protection Standpipe Piping 3, Green Continuous
F-STAN-EQIP Fire Protection Standpipe Equipment 5,
Blue Continuous
F-CO2S-PIPE CO2 (Carbon Dioxide) System Piping 4, Cyan Continuous
F-CO2S-EQPM CO2 (Carbon Dioxide) System Equipment
6, Magenta Continuous
S.3.E1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Electrical: Lighting Plan
Drawing File: ELITE1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
E-PLIT-TEXT General Notes and Specifications 3, Green Continuous
E-PLIT-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
E-PLIT-NOTE Lighting Plan Notes, Call-Outs, 3, Green Continuous
E-PLIT-KEYN ConDoc Keynotes 3, Green Continuous
E-PLIT-SYMB Lighting Plan Symbols, Bubbles and Targets 4, Cyan Continuous
E-PLIT-DIMS Lighting Plan Dimensions 2, Yellow Continuous
Project Information Layers
Note:
This layering model locates ceiling fixtures of multiple
disciplines in the architectural reflected ceiling plan with the
understanding that the architect will be locating visible features
with the engineering disciplines providing the utilities support
for them. It would also be acceptable to locate fixtures in the
discipline specific drawings with the obvious condition that the
location be consistent (E-LITE-CLNG should appear in ACLG1.DWG
or ELITE.1DWG but not both) and the other disciplines drawings
then reference the appropriate file to create their backgrounds.
E-LITE-FLOR Floor Lighting 5, Blue Continuous
E-LITE-ROOF Roof Mounted Lighting 5, Blue Continuous
E-LITE-SITE Site Lighting 5, Blue Continuous
E-LITE-NUMB Lighting Circuit Numbers 4, Cyan Continuous
E-LITE-IDEN Luminaire Identification and Text 3,
Green Continuous
E-LITE-SWCH Lighting Switches 5, Blue Continuous
E-LITE-WIRE Wiring and Conduit 4, Cyan Continuous
E-WKLP-INFO Clearances and work space req. (NEC Codes
etc.) 2, Yellow Dashed
S.3.E1 Continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: ACLG1.DWG
E-LITE-CLNG Ceiling Mounted Lighting 3, Green Continuous
E-LITE-EXIT Exit Lighting 3, Green Continuous
E-LITE-EMER Emergency Lighting 3, Green Continuous
A-CLNG Ceiling Elements, soffits, and Bulkheads 94, Grey Green Continuous (half tone)
A-CLNG-GRID Ceiling Grid (T-Bar Ceiling) 14, Grey Red Continuous (half tone)
A-CLNG-ACCS Access Panels & Ceiling Penetrations 94, Grey Green Continuous (half tone)
A-CLNG-SPCL Ceiling Mounted Specialties (clocks,
fans, etc.) 94, Grey Green Continuous (half tone)
M-CDFF-SUPP Ceiling Supply Diffusers 174, Grey Blue Continuous (half tone)
M-CDFF-RETN Ceiling Return Diffusers 174, Grey
Blue Continuous (half tone)
F-SPRN-SPHD Sprinkler Heads 214, Grey Magenta
Continuous (half tone)
Drawing File: AFLOR1.DWG
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 134, Grey Cyan Continuous (half tone)
A-WALL Walls 174, Grey Blue Continuous (half tone)
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous
(half tone)
S.3.E2 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Electrical: Power Distribution Plan
Drawing File: EPOWR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
E-PPOW-TEXT General Notes and Specifications 3, Green Continuous
E-PPOW-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
E-PPOW-NOTE Electrical Power Plan Notes, Call-Outs, 3, Green Continuous
E-PPOW-KEYN ConDoc Keynotes 3, Green Continuous
E-PPOW-SYMB Electrical Power Plan Symbols, Bubbles & Targets 6, Magenta Continuous
E-PPOW-DIMS Electrical Power Plan Dimensions 2,
Yellow Continuous
Project Information Layers
E-POWR-WALL Wall Outlets & Receptacles 5, Blue Continuous
E-POWR-CLNG Ceiling Receptacles and Devices 5, Blue Continuous
E-POWR-FLOR Floor Mounted Outlets 3, Green Continuous
E-POWR-EQPM Power Equipment 5, Blue Continuous
E-POWR-CABL Cable Trays 4, Cyan Continuous
E-POWR-NUMB Power Circuit Numbers 4, Cyan Continuous
E-POWR-WIRE Power Wiring and Conduit 4, Cyan Continuous
E-CTRL-EQPM Control System Equipment & Devices 5, Blue Continuous
E-CTRL-WIRE Control System Wiring 4, Cyan Continuous
E-GRND Electrical Ground System 3, Green Continuous
E-PROT-WIRE Fire Protection System Wiring 3, Green
Continuous
E-WKLP-INFO Clearances and work space req. (NEC Codes
etc.) 2, Yellow Continuous
External Reference Files
Drawing File: AFLOR1.DWG
Walls
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous (half tone)
A-WALL-PRHT Partial Height Walls 134, Grey Cyan Continuous (half tone)
A-WALL-JAMB Door & Window Jambs 214, Grey Magenta Continuous (half tone)
S.3.E2 Continued
____
Layer Description Color Linetype
____
A-CLNG-OVHD Major Ceiling Elements Shown on Floor
Plan 174, Grey Yellow Hidden(half tone)
A-DOOR Doors 94, Grey Green Continuous (half tone)
A-GLAZ Window, Window Walls, Curtain Walls 174, Grey Blue Continuous (half tone)
A-GLAZ-SILL Window Sills 94, Grey Green Continuous
(half tone)
Floor Information
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 174, Grey Blue Continuous (half tone)
A-FLOR-STRS Stairs, Escalators, and Ladders 134, Grey Cyan Continuous (half tone)
A-FLOR-TPTN Toilet Portions 134, Grey Cyan Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous (half tone)
S.3.E3 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
Electrical: Riser Diagram
Drawing File: ERISR1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
E-RISR-TEXT General Notes and Specifications 3, Green Continuous
E-RISR-SCHD Schedules and Tables of Text 3, Green
Continuous
Items Drawn in Model Space
Drawing Information Layers
E-RISR-NOTE Electrical Riser Diagram Notes, Call-Outs, 3, Green Continuous
E-RISR-KEYN ConDoc Keynotes 3, Green Continuous
E-RISR-SYMB Electrical Riser Diagram Symbols... 4, Cyan Continuous
E-RISR-DIMS Electrical Riser Diagram Dimensions 2,
Yellow Continuous
Project Information Layers
E-POWR-EQPM Power Equipment 5, Blue Continuous
E-POWR-NUMB Power Circuit Numbers 4, Cyan Continuous
E-POWR-WIRE Power Wiring and Conduit 4, Cyan Continuous
E-LITE-NUMB Lighting Circuit Numbers 4, Cyan Continuous
E-LITE-IDEN Luminaire Identification and Text 4,
Cyan Continuous
E-LITE-SWCH Lighting Switches 5, Blue Continuous
E-LITE-WIRE Wiring and Conduit 4, Cyan Continuous
E-CTRL-EQPM Control System Equipment & Devices 5, Blue Continuous
E-CTRL-WIRE Control System Wiring 4, Cyan Continuous
E-GRND Electrical Ground System 3, Green Continuous
E-PROT-WIRE Fire Protection System Wiring 4, Cyan
Continuous
E-WKLP-INFO Clearances and work space req. (NEC Codes
etc.) 2, Yellow Continuous
S.3.Q1 MAJOR BUILDING PROJECT CONSTRUCTION
DOCUMENT SET
TeleCom: Communication Systems Plan
Drawing File: QCOMM1.DWG
____
Layer Description Color Linetype
____
Items Drawn in Paper Space
See Section S.0.1 for typical general layer information
Q-PCOM-TEXT General Notes and Specifications 3, Green Continuous
Q-PCOM-SCHD Schedules and Tables of Text 6, Magenta
Continuous
Items Drawn in Model Space
Drawing Information Layers
Q-PCOM-NOTE Communications Plan Notes, Call-Outs, 3, Green Continuous
Q-PCOM-KEYN ConDoc Keynotes 3, Green Continuous
Q-PCOM-SYMB Communications Plan... 6, Magenta Continuous
Q-PCOM-DIMS Communications Plan Dimensions 2, Yellow
Continuous
Project Information Layers
E-CTRL-EQPM Control System Equipment & Devices 6, Magenta Continuous
E-CTRL-WIRE Control System Wiring 6, Magenta Continuous
E-GRND Electrical Ground System 3, Green Continuous
E-PROT-WIRE Fire Protection System Wiring 3, Green
Continuous
E-WKLP-INFO Clearances and work space req. (NEC Codes
etc.) 2, Yellow Continuous
Q-DATA-WALL Data Wall Outlets & Receptacles 3, Green Continuous
Q-DATA-FLOR Data Floor Mounted Outlets 3, Green Continuous
Q-DATA-EQPM Data Systems Equipment 6, Magenta Continuous
Q-DATA-CABL Data Cable Trays 3, Green Continuous
Q-DATA-NUMB Data Circuit Numbers 3, Green Continuous
Q-DATA-WIRE Data Wiring and Conduit 3, Green Continuous
Q-PHON-WALL Data Wall Outlets & Receptacles 3, Green Continuous
Q-PHON-FLOR Data Floor Mounted Outlets 3, Green Continuous
Q-PHON-EQPM Data Systems Equipment 6, Magenta Continuous
Q-PHON-CABL Data Cable Trays 3, Green Continuous
Q-PHON-NUMB Data Circuit Numbers 3, Green Continuous
Q-PHON-WIRE Data Wiring and Conduit 3, Green Continuous
Other Tele-communications services that may need to be accommodated (structured like the above examples) are:
Q-SOUN Sound or PA systems
Q-CCTV Closed Circuit Television Systems
Q-TVAN Television Antenna Systems
Q-SERT Security Systems
Q-NURS Nursing Call Systems
S.3.Q1 Continued
____
Layer Description Color Linetype
____
External Reference Files
Drawing File: AFLOR1.DWG
Walls
A-WALL-FULL Full Height Walls 214, Grey Magenta Continuous (half tone)
A-WALL-WHED Window Headers 214, Grey Magenta Continuous (half tone)
A-WALL-DHED Door Headers 214, Grey Magenta Continuous (half tone)
A-WALL-PRHT Partial Height Walls 134, Grey Cyan Continuous (half tone)
A-WALL-JAMB Door & Window Jambs 214, Grey
Magenta Continuous (half tone)
A-DOOR Doors 94, Grey Green Continuous (half tone)
A-GLAZ Window, Window Walls, Curtain Walls 174, Grey Blue Continuous (half tone)
A-GLAZ-SILL Window Sills 94, Grey Green Continuous
(half tone)
Floor Information
A-FLOR-LEVL Level Changes, Ramps, Pits, & Depression 174, Grey Blue Continuous (half tone)
A-FLOR-STRS Stairs, Escalators, and Ladders 134, Grey Cyan Continuous (half tone)
A-FLOR-TPTN Toilet Portions 134, Grey Cyan Continuous
(half tone)
Drawing File: COLGRID.DWG
S-COLS Structural Columns 214, Grey Magenta Continuous (half tone)
S-GRID Column Grid 174, Grey Yellow Center (half tone)
S-GRID-IDEN Column Grid Tags 134, Grey Cyan Continuous
(half tone)