Scholars Room A/V
This room is equipped with an in-ceiling, drop-down projector/screen and in-room audio.
Turn On Projector
Follow the below steps to turn on/adjust the drop-down projector/screen:
- Press the Projector On button on the Projector Control Panel.
- If the Projector/Screen has not been lowered, this will cause the screen and projector to lower into place.
- If the Projector/Screen is already lowered, this will ensure the projector is on.
Projector Control Panel Location: East Wall By North Doors
Projection Level Control Panel Location: East Wall By North Doors
Connecting to Projector
You can connect to the in-room projector via the HDMI port.
HDMI Port Location: North Wall of Room
Turn Off Projector
To temporarily turn off the projector, but not raise the screen or projector, press the Projector Off button on the Projector Control Panel.
To turn off and fully raise the projector & screen, press the Raise or Lower button on the Projector Control Panel.
Audio Output
To utilize the in-room audio via HDMI connection, you must turn on the projector as described above and ensure your audio output is the MMA10G-TRXS option.
If you are using audio via Aux input or through other cable connections to the Primary Connection Panel or Secondary Connection Panel, use the information below to adjust the volume.
Adjusting Volume
Volume adjustments may be made using the Volume Control Panel and the steps below:
- Select the appropriate audio input by pressing the button next to the corresponding input.
- The table below shows the correlation of inputs.
- Use the knob to increase or decrease the volume. Pressing the knob inward will mute/unmute the audio.
Volume Control Panel Location: East Wall By North Doors
Primary Connection Panel Location: North Wall
Secondary Connection Panel Location: North Wall
| Wall Input | Control Panel Description |
|---|---|
| HDMI Port | Mic4 |
| Primary Control Panel - Top Left | Mic1 |
| Primary Control Panel - Bottom Left | Mic2 |
Lighting for this space can be controlled using the Lighting Control Panel shown below. The buttons on the right side of the panel indicate the brightness level of the room lights.
- Top button = full brightness
- Middle buttons = levels of dimming.
- Bottom button = lights off
Location of Lighting Control Panel: East Wall By North Doors
For any immediate, in-person A/V needs, please contact Union Maintenance, 405-255-1294.
